Table of Contents
Advertisement
2.8.Power supply precautions
Power Supply and Voltage
- PN-V701 is designed to be used under commercial 100V-240V power
supply, but shortage of power supply may occur in wall video installation.
- Arrange plural circuit and level power consumption in each circuit.
- Avoid over power consumption such as by delaying the wake-up time using
power-on delay function.
Power Strip
- Confirm the rated current value of the power strip. The total amount of current consumption of
all the connected devices shouldn't exceed the rated current value.
- Avoid using a movable blade plug which may be damaged if
excess force is applied to. It may also cause abnormal heat
generation even under the rated current value. We recommend a
normal blade type.
- The inner core wire may be damaged and cause abnormal heat
generation if the code is pulled with excess force. We recommend
the code fixed with bushing.
Confidential
Copyright © All rights reserved, SHARP CORPORATION
Circuit breaker
box
Display
Circuit A
Display
Movable Blade Plug
No bushed
Display
Circuit B
Display
Normal Blade Type
Bushed
18
Advertisement
Table of Contents
