Adjusting The Speaker Volume; Setting Color Mode - Sharp LL-T17D3 Operation Manual

Adjusting the screen display and speaker volume

Adjusting the speaker volume

1. Without the OSD Menu being displayed, press
the or the button.
VOLUME 80
BRIGHT 31
2.Check that [VOLUME] is selected.
If it is not selected, press the
and select [VOLUME].
3. Adjust by pressing the
button (increase).
Note:
- On Screen display for adjustment disappears
several seconds after the last operation.

Setting color mode

Color tone can be set as below.
STD
Displays image with the color tone results from
original scheme of liquid crystal panel.
sRGB
sRGB is international standard of color represen-
tation specified by IEC (International
Electrotechnical Commission).
Color conversion is made in taking account of
liquid crystal's characteristics and represents
color tone close to its original image.
VIVID
Displays an image with dynamic and VIVID
primary colors.
- If [COLOR MODE] is set to [sRGB] or [VIVID],
[WHITE BALANCE] is set to [STD].
How to set
Press the / MODE button when the OSD Menu is
not displayed.
Each time the button is pressed the next menu item
appears. (STD → sRGB → VIVID → STD)
On Screen display for adjustment disappears
several seconds after the last operation.
SELECT ... [
/ MODE]
/ MODE button
button (decrease) or
15