Digitizer Pen Cable; Connecting Devices; Connection With A Pc - Sharp LL-S242A-W Operation Manual

Digitizer pen cable

You can secure the digitizer pen cable using the supplied clamper and fixing screw.
1. Pass the digitizer pen cable through the ring of the clamper.
2. Attach the clamper using the fixing screw.
Caution
• Be sure to turn off the power and disconnect the plug from
the power outlet before connecting/disconnecting cables.
Also, read the manual of the equipment to be connected.
• Do not forcibly bend or apply force to cables. Doing so may
result in wire breakage or other damage.
• When connecting cables, spread a soft cloth on a stable
level surface such as a desk, and gently place the monitor
on it with the screen facing down.
• Do not use any cable that has a damaged or deformed
terminal. Using such cables may cause malfunctions.
• Connect USB devices that have the following thicknesses
around the connector area.
D
B
C
TIPS
• Images may not be displayed properly depending on the
computer (video card) to be connected.
• To use the digitizer pen, the necessary software must be
installed on the computer from the supplied CD-ROM. (See
page 19.)
• When connecting a USB device to the USB terminal, use
only USB devices with current consumption of 500mA or
lower.
Fixing screw

Connecting Devices

A 12mm
B 38mm
C 8mm
A
D 17mm
Clamper
Digitizer pen cable

Connection with a PC

Connect the monitor and a PC using the connection cable.
nInputting video and audio
HDMI input terminal
Commercially available HDMI cable
(conforming to the HDMI standard)
HDMI input terminal
Check the orientation of the connector and insert it horizontally
as far as it will go.
• It is possible to connect the monitor's HDMI input terminal
to a smartphone or similar MHL-compliant device using a
commercially available MHL cable.
This product supports MHL 1.
DisplayPort input terminal
Commercially available DisplayPort cable
DisplayPort input terminal
Check the orientation of the connector and insert it horizontally
as far as it will go.
Binding Cables
To HDMI output
terminal on PC
To DisplayPort output
terminal on PC
11
E