Connecting To External Devices; Connecting To A Vcr, A Dvd Player, Etc - Sharp LC-20M4E Operation Manual

Connecting to External Devices

Connecting to a VCR, a DVD player, etc. (AV 1/2 IN)
This LCD monitor can be connected to most external devices as shown below.
When connecting to an external device, turn off the power of the main unit and then connect to the device
to prevent any possible damage.
Audio cord
To AUDIO input
terminal
To audio output
terminal
* For high quality pictures, a DVD player
with a COMPONENT terminal should be
connected to the COMPONENT terminal
of the unit. (see page 17)
Notes:
PC connection is not possible.
Use a commercially available audio/video cord for the cable.
When connecting or disconnecting the video cord (BNC TYPE) to or from the VIDEO input terminal, disconnect the
audio cable.
Only connect audio/video signals to AV 1/2 IN terminals. Connecting other signals may result in a malfunction.
When external devices are connected to both the VIDEO and S-VIDEO terminals (and AV1 is selected), priority is
given to the S-VIDEO input terminal. To view images from the VIDEO input terminal, do not connect any cable to the
S-VIDEO terminal.
For details concerning the usage and connection of external devices, see their respective instruction manuals.
16
AV 2 IN/OUT AV 2 IN/OUT
AUDIO AUDIO VIDEO VIDEO
R L R
Video cord
(BNC TYPE)
To VIDEO input
terminal
To AUDIO input
terminal
Audio cord
To audio output
terminal
Audio Audio Video
To video output
(R) (L)
terminal
VCR, Laser disc player, etc.
AV 1 IN AV 1 IN
AUDIO AUDIO VIDEO VIDEO S-VIDEO S-VIDEO
L
Audio Audio
(R) (L)
COMPONENT COMPONENT
( C ) ( C )
Y P P
B B R R
S-video cord
To S-VIDEO input
terminal
To VIDEO input
terminal
Video cord
(BNC TYPE)
To video output
terminal
Video
To S-Video
output terminal
DVD DVD TUNER/BAND TUNER/BAND AUX 1 AUX 1 AUX 2 AUX 2 AUX 3 AUX 3
SURROUND SURROUND
ON/OFF ON/OFF
DVD Player, etc.
POWER
INPUT
DC13V
S-Video