Valve History - Ecosoft WS1 CE Manual

CONTROL VALVE PROGRAMMING AND COVER DRAWING MANUAL

VALVE HISTORY

STEP 1VH
STEP 2VH
STEP 3VH
STEP 4VH
STEP 5VH
STEP 6VH
RETURN TO NORMAL MODE
Values in steps 2VH through 6VH cannot be reset.
2
This manual is the intellectual property of Ecosoft. Copying and reprinting is prohibited. © 2021
– Press ▲ and ▼ simultaneously for three seconds and release. Then press ▲ and ▼
STEP 1VH
simultaneously and release. If screen in step 2VH does not appear in 5 seconds the lock on the
valve is ac�vated. To unlock press ▼, NEXT, ▲, and CLOCK in sequence, then press ▲ and ▼
simultaneously for 3 seconds and release. Then press ▲ and ▼ simultaneously and release.
STEP 2VH – So�ware version. Displays the current so�ware version.
Press NEXT to go to Step 3VH. Press REGEN to exit Valve History.
STEP 3VH – Days, total since start-up: This display shows the total days since startup. Press NEXT
2
to go to Step 4VH. Press REGEN to return to previous step.
STEP 4VH – Regenera�ons, total number since start-up: This display shows the total number of
regenera�ons that have occurred since startup. Press NEXT to go to Step 5VH. Press REGEN to return
to previous step.
STEP 5VH – Volume, total used since start-up: This display shows the total cubic meters treated since
startup. This display will equal zero if a water meter is not installed. Press NEXT to go to Step 6VH.
Press REGEN to return to previous step.
STEP 6VH – Error Log. This display shows a history of the last 10 errors generated by the control
during opera�on. The motor posi�on count at the �me of drive error detec�on is recorded in the top
line of the display. Press ▲ or ▼ to view each error recorded. Press NEXT to exit Valve History. Press
REGEN to return to previous step.
Valve History
22