Diagnostics - Ecosoft WS1 CE Manual

CONTROL VALVE PROGRAMMING AND COVER DRAWING MANUAL

DIAGNOSTICS

STEP 1D
STEP 2D
STEP 3D
STEP 4D
STEP 5D
STEP 6D
This manual is the intellectual property of Ecosoft. Copying and reprinting is prohibited. © 2021
STEP 1D – Press ▲ and ▼ simultaneously for three seconds. If screen in step 2D does not appear
in 5 seconds the lock on the valve is ac�vated. To unlock press ▼, NEXT,
sequence, then press ▲ and ▼ simultaneously for 3 seconds.
STEP 2D – Days, since last regenera�on: This display shows the days since the last regenera�on
occurred. Press NEXT to go to Step 3D. Press REGEN to exit Diagnos�cs.
STEP 3D – Volume, since last regenera�on: This display shows the volume of water that has been
treated since the last regenera�on. This display will equal zero if a water meter is not installed.
Press NEXT to go to Step 4D. Press REGEN to return to previous step.
STEP 4D – Reserve History Volume used for last 7 days: If the valve is set up as a so�ener, a
meter is installed and Set Volume Capacity is set to "Auto," this display shows 0 day (for today)
and the reserve capacity. Pressing ▲ will show day 1 (which would be yesterday) and the reserve
capacity used. Pressing ▲ again will show day 2 (the day before yesterday) and the reserve
capacity. Keep pressing ▲ to show the capacity for days 3, 4, 5 and 6. ▼ can be pressed to move
backwards in the day series. This screen is not displayed if fi lter, �me clock, meter immediate,
alternator or volume override regenera�on is selected. Press NEXT at any �me to go to Step 5D.
Press REGEN to return to previous step.
STEP 5D - Volume, 63-day usage history: This display shows day 0 (for today), day 1 (for
yesterday), etc., and the volume of water treated that day. Press ▲ to show the volume of water
treated for the last 63 days. If a regenera�on occurred on the day the le�er "R" will also be
displayed. This display will show dashes if a water meter is not installed. Press NEXT at any �me
to go to Step 6D. Press REGEN to return to previous step.
STEP 6D - Tank Transfer History. Only displayed when 1.0TWIN is selected in Step 2CS. Use ▲
or ▼ to scroll through the last 10 tank transfers. "1"= transfer number – 10 transfers maximum.
"A" = tank transferring. "3 DAYS" = days ago of transfer – 99 days maximum. "0.00 m
used at �me of tank transfer. "13:35" = �me of transfer.
Press NEXT to go to Step 7D. Press REGEN to return to previous step.
Diagnos�cs
20
▲, and CLOCK in
" = M
3 3