Diagnostics - Ecosoft WS1 DV Programming And Service Manual

WATER SPECIALIST DISC VALVE PROGRAMMING AND SERVICE MANUAL
14

10. DIAGNOSTICS

STEP 1D STEP 1D – From normal mode, press UP and DOWN
simultaneously for 3 seconds and release.
STEP 2D STEP 2D – Software version. Press NEXT to go to Step 3D.
Press REGEN to exit Diagnostics.
STEP 3D STEP 3D – Days Since Last Regeneration. Press NEXT to go
to Step 4D. Press REGEN to return to previous step.
STEP 4D – Volume Since Last Regeneration. Press NEXT to
STEP 4D
go to Step 5D. PressREGEN to return to previous step.
STEP 5D STEP 5D – Reserve Capacity – Displays the actual reserve
to go to Step 6D. Press REGEN to return to previous step.
STEP 6D STEP 6D – Treated Water Usage – Displays the volume of
occurred. d0 = Today, d1 = Yesterday. Press NEXT to go to
Step 7D. Press REGEN to return to previous step.
capacity calculated for
yesterday. This screen
will only be displayed
when "rES" is selected
in step 3S. Press NEXT
treated water per day
for the past 63 days.
REGEN indicator is
activated for days on
which a regeneration