Section 7: Troubleshooting; General Information - Vanair AIR N ARC RELIANT 250 Series Operations Manual & Parts List

All-in-one power systems

Table of Contents

AIR IN ARC

200 SERIES ALL-IN-ONE POWER SYSTEM

TROUBLESHOOTING

7.1 GENERAL INFORMATION

The information contained in this section has been

compiled from years' worth of information gathered

from the field. It contains symptoms and usual

causes for the most common types of problems that

may occur. All available data concerning the trouble

should be systematically analyzed before undertak-

ing any repairs or component replacement.

A visual inspection is worth performing for almost all

problems and may avoid unnecessary additional

damage to the machine. The procedures which can

be performed in the least amount of time and with the

least amount of removal or disassembly of parts,

should be performed first. Adherence to a routine

maintenance regimen will minimize the occurrence of

many common problems. Refer to Section 6.3,

Maintenance Schedule Table for a typical mainte-

nance regimen program.

Although Vanair

may occur during the operation life of the machine

package, the Troubleshooting Guide (Section 7.3)

may not cover all possible situations. Be aware that

additional troubleshooting information may be found

in other sources such as the Engine Operator's Man-

ual. Should the situation remain unresolved after

exhausting available sources, contact the Vanair

Service Department at:

Phone: 800-526-8817 (toll free)

Phone: 219-879-5100, ext. 400

Fax: 219-879-5335

www.vanair.com

When contacting the Vanair Service

Department, please have machine serial

number on hand to quickly expedite

service. See Figure 7-1 for machine serial

SECTION 7:

strives to anticipate situations that

NOTE

plate location.

090019-OP_r0