Section 3: Specifications - Vanair AIR N ARC RELIANT 250 Series Operations Manual & Parts List

All-in-one power systems
Table of Contents

Advertisement

®
AIR N ARC
200 SERIES ALL-IN-ONE POWER SYSTEM
SPECIFICATIONS
TABLE 3A: WELDER, GENERATOR, AND ENGINE SPECIFICATIONS
SYSTEM INFORMATION
Rated Welder Output
Welding Leads
AC Generator
AC Generator 120V Power Rating
AC Generator 240V Power Rating
Battery Charger Capacity
Engine
Engine Oil Capacity
Fuel Consumption
Fuel Tank Capacity
Fuel Type
Operating Temperature Limits
I
For in-depth specifications and requirements regarding the Kohler
Manual.
II
Ethanol blended fuels, such as E85, are prohibited for use with the Kohler 25 EFI engine. DO NOT use ethanol-
based fuels.
TABLE 3B: AIR COMPRESSOR SPECIFICATIONS
COMPRESSOR INFORMATION
Compressor Type
Air Compressor Capacity
Air Filter
Oil Capacity/Type
Air Tank Capacity
Tank Pressure Rating
Safety Relief Valve Setting
Operating Range (ambient)
Electrical System
Cooling System
Instrument Gauges
Adjustable Air Pressure Control
Settings
Air Service Outlets
®
SECTION 3:
200A High Frequency DC/CC, DC/CV; 100% Duty Cycle @ 200 Amps
25 or 50 Ft. Optional (Refer to Section A.5 for Optional Parts Listing)
5,000 Watts Continuous Duty
60 Hz 1 PH, 2-20 Amp Circuits
60 Hz 1 PH, 20 Amp
12V Charge, 12V Boost, 24V Boost
I
25 EFI
Two (2) Quarts 10W30 (Refer to Engine Operator's Manual for Extreme Conditions)
1.27 GPH at Full Engine Speed/Load (Approx. 8.6 Hour Runtime w/ 11Gal. Tank)
11 Gallons (41.6 L)
87 Octane or Higher Unleaded Gasoline
-20°F to 110°F (-29° to 43°C): Consult Section 5.8, Extreme Condition
Reciprocating, Dual-Stage
24 CFM @ 175 PSI
Pleated Paper, Dry Type
Service: 1.75 Quarts
ISO68 Premium Non-Detergent Lubricant
Thirty (30) Gallons or Remote Tank
200 PSI
200 PSI
-20°F to 110°F (-29° to 43°C): Consult Section 5.8, Extreme Condition
12 VDC
Air to Oil Heat Exchanger
Pressure and Hour Meter
Factory Preset Pressure: 150 PSI (Cut-In) / 175 PSI (Maximum Cut-Out)
Two (2) on Control Panel (remote panel version), One (1) on Machine
090019-OP_r0

SECTION 3: SPECIFICATIONS

SPECIFICATION
II
Operation
®
25 EFI engine, refer to the Engine Operator's
SPECIFICATION
Operation
PAGE - 31

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents