1. Certification; Description Of Storage Tanks - Atlantic CORFLINOX 300 Installation, Use And Maintenance Instructions

1. CERTIFICATION

- Energy labelling (2010/30/EU): from 26/09/2015
In application of the directive and according to the requirements of the EU regulation
No. 812/2013 of 18 February 2013, the information on storage tanks with a volume of less
than or equal to 500 litres is available in appendix B (see page 31).
- Eco-design (2009/125/EC): from 26/09/2015
In application of the directive and according to the requirements of EU regulation
no. 814/2013 of 02 August 2013, the technical parameters of storage tanks with a volume
less than or equal to 2,000 litres are available in appendix C (see page 31).

2. DESCRIPTION OF STORAGE TANKS

Stainless steel tank for use in drinking water heating systems, in combination with external
heat exchangers. Complete with thermal insulation and side inspection hole.
The tanks can be combined with any modern heating system.
Made of superior quality 1.4521 molybdenum stainless steel, which is highly resistant to
corrosion. A construction that is easy to install, fitted with a thermometer and a coupling for
temperature sensors / thermostats.
The storage tanks' thermal insulation consists of:
- for the M0 version, a rigid grey sheet-metal casing over 100 mm of glass wool,
- for the M1 version, a flexible insulating casing consisting of 100 mm of glass wool covered
with a flexible PVC envelope (non-flammable),
Maximum water temperature in use: 95°C
Service pressure: 10 bar
Side inspection hole from 750 l (DN 110)
Cleaning hole at the top on all models (80.5 x 97 mm)
Electric immersion heating elements can be added to the CORFLINOX (see section 6:
electric elements).
The technical specifications can be found in the appendix A page 27.
02.02.2021 CORFLINOX
EN
Page 13 / 32