Installation Of The Bracket Onto The Hamilton T1 Ventilator - Technimount System PRO 60-SD Series User Manual

INSTALLATION OF THE BRACKET ONTO THE HAMILTON T1 VENTILATOR

1. The Bracket Pro Serie® 60-SD is designed to be
installed on the Hamilton T1 Ventilator.
2. Place bracket on a stable and large surface.
3. Pull the two (2) Red Quick Release Mechanisms
outwards on each side of the bracket to unlock
the arms.
4. Gently lower the bracket all the way down onto
its back.
www.technimount.com
Installation Guide
BP60-SD UG 202109-01
Return To Table of Contents
17