Technimount System PRO 60-SD Series User Manual page 18

INSTALLATION OF THE BRACKET ONTO THE HAMILTON T1 VENTILATOR
(CONTINUED)
5. Place the Hamilton T1 inside the bracket.
6. Pull on the Red Quick Release Mechansisms and
raise the arms towards the front of the medical
device to close and lock the arms into upper
position.
7. Release the Red Quick Release Mechanisms.
WARNING
Ensure both arms are securely locked into upper
position prior to transport or mobilizing with the
equipment. If incorrectly locked it could cause
injury to the patient or operator and damage to the
equipment.
8. The medical device and bracket are now ready
for transport.
Return To Table of Contents
18
Installation Guide
BP60-SD UG 202109-01 www.technimount.com