Installation Of The Bracket Onto The Crossvent Ventilator - Technimount System BRACKET PRO 100 Series User Manual

INSTALLATION OF THE BRACKET ONTO THE CROSSVENT VENTILATOR

1. The Bracket Pro Serie® 100 is designed to be
installed on the Crossvent ventilator.
2. Locate the metal plate on the back of the
ventilator. This metal plate must be removed
and will be replaced by the back plate from the
bracket assembly.
3. Remove the metal plate located on the back of
the ventilator by removing all 4 screws.
4. This part will not be used with the main bracket
assembly.
www.technimount.com
Installation Guide
BP100 UG 202002-R01
Return To Table of Contents
17