Installation Of The Bracket Onto The Maxblend2 Oxygen Blender - Technimount System BRACKET PRO 151 Series User Manual

INSTALLATION OF THE BRACKET ONTO THE MAXBLEND2 OXYGEN BLENDER

1. The Bracket Pro Serie 151 is designed to be
installed on the Maxtec MaxBlend2 Oxygen
Blender .
2. Locate the rear block of the medical device.
3. Unplug the bottle before installing the main
structure.
4. Locate the U-Block of the main assembly and
align with the rear block of the medical device.
www.technimount.com
INSTALLATION GUIDE
BP151 UG 202108-01
Return to table of content
17