Table of Contents
Advertisement
TECHNICAL SPECIFICATIONS
Product Name
Product Description
Compatibility of Medical Device*
Environment of Usage
Product Section Material
Product Finish
Environmental Regulations
Temperature of Usage
Certification
Installation
Attachment Options
Transportation Compatibility System
Features
Physical Overall Dimensions
Weight
Part Number
Others Models and Configuration Options
* Product and medical equipment manufacturers names are trademarks™ or registered trademarks® of their respective
holders. Technimount does not have a commercial relationship with these medical equipment manufacturers.
Return To Table of Contents
12
Introduction
Bracket Pro Serie® 60-SD
Single disc bracket mounting system to secure the Hamilton-T1
ventilator on surfaces and cots/stretchers in emergency vehicles
Hamilton-T1 Ventilator from Hamilton Medical
EMS/CCT (Ground & Flight) – Hospital/Clinic, Military
•
Main Assembly: Aluminum 6061-T6
•
Standard Bottom Disc: Aluminum 6061-T6 with 304 Stainless
Steel Insert
•
Main Assembly: Silver-Anodized Finish
•
Standard Bottom Disc: Silver-Anodized Finish
Complying with RoHS 3
- 35° C to 45° C
Tested in Compliance with:
•
SAE J3043 (26 G)
Device Retained on Main Assembly with 2 upper arms with
Red Quick Release Mechanisms and lateral blockers
Standard Bottom Disc
Compatible with Technimount' s :
•
Standard Surface Base
•
Safety Arm System For Stryker Cots (PowerPro – XT and Mx-Pro)
•
Floor Mount (Flight)
•
Robust Mounting Solution for EMS/CCT/ALS Transport
•
No Screw or Attatchment into the Housing of the Medical Device
•
Access to all Connectors and Accessories
•
Flight and Ground Compatibility
•
Multiple Configuration Options for Transport
Width 11.5 in, Depth 10.2 in, Height 11.5 in
5.8 lb
• 700-12-HMSD - Bracket Pro Serie® 60-SD
• 100-20-UN - Standard Surface Base
Contact Technimount EMS for more information or for other options at
customerservice@technimount.com
BP60-SD UG 202109-01
www.technimount.com
Advertisement
Table of Contents
