Installation Of The Bracket Onto The Maxblend Oxygen Blender - Technimount System PRO 150 Series User Manual

INSTALLATION OF THE BRACKET ONTO THE MAXBLEND OXYGEN BLENDER

1. The Bracket Pro Serie 150 is designed to be
installed on the Maxtec MaxBlend Oxygen
Blender .
2. Locate the rear block of the medical device.
3. Locate the U-Block of the main assembly and
align with the rear block of the medical device.
www.technimount.com
INSTALLATION GUIDE
BP150 UG 202108-01
Return to Table of Content
17