Table of Contents
Advertisement
INSPECTION PROCESS AND SCHEDULE
MAINTENANCE PROGRAM
The following inspection routine and schedule is intended as a general guide for preventive maintenance of the
Bracket. Factors such as weather, environment, geographical location, and individual usage will necessitate different
maintenance. If you are unsure as to how to perform these maintenance inspections or at what interval to perform
these inspections, please contact your Technical Support Team at techsupport@technimount.com. Check each routine
and replace damaged or worn out parts if necessary.
Follow timetable below for maintenance (either in months (M) or hours (H)), in accordance with your Service's current
maintenance practices and protocols.
ITEM
ROUTINE
9 Inspect Bracket
▪
▪
▪
Bracket
9 Verify Disc is clean and working properly
9 Ensure Red Quick Release Mechanisms are working
properly (pull to release and then lock)
9 Ensure arms are locking into position properly
9 Do a visual inspection of the Bracket to ensure there is
no damage or chemical attack
www.technimount.com
Maintenance Guide
Inspect the screws of the bracket
Inspect the bottom screw that tightens into the
medical device
Ensure bracket mechanisms are working properly
and there are no particles, obstacles, or debris
affecting functionality
BP60-SD UG 202109-01
6 M
1 M
3 M
OR
OR
OR
12
2 H
6 H
H
X
Return To Table of Contents
12
M
OR
24
H
25
Advertisement
Table of Contents
