Removing The Bracket From The Standard Surface Base - Technimount System PRO 60-SD Series User Manual

OPERATING THE BRACKET ON THE SAFETY ARM SYSTEM (CONTINUED)

REMOVING THE BRACKET FROM THE STANDARD SURFACE BASE

1. To remove the bracket from the Safety Arm
System, press the Red Quick Release Mechanism
located on the front Standard Surface Base.
2. While holding the Red Quick Release Mechanism,
slide outwards horizontally to remove from the
Standard Surface Base. Hold the ventilator from
the middle of the unit to gently remove from the
base.
www.technimount.com
Installation Guide
BP60-SD UG 202109-01
Return To Table of Contents
21