Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Technimount System BRACKET PRO 100 Series
Summary of Contents for Technimount System BRACKET PRO 100 Series
- Page 1 BRACKET PRO SERIE ® USER GUIDE...
-
Page 2: Copyright
Copyright Technimount System, Subsidiary of Technologies CGC Inc. 2019. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the written permission of Technimount System or its affiliate companies. Trademark Attributions Bracket Pro Serie®... -
Page 3: Contact Information
Contact Information CORPORATE HEADQUARTERS Technimount System Customer Service or Technical Support 3770 Jean Marchand Street, Suite 100 Quebec (QC) G2C 1Y6 Canada www.technimount.com T + 1 581.998.9820 F + 1 855.339.6351 customerservice@technimount.com techsupport@technimount.com NOTE: Please have the serial number of your Technimount product available (as shown in the figure below) when calling Technimount Customer Service or Technical Support. -
Page 4: Table Of Contents
Table of Contents COPYRIGHT ................................2 CONTACT INFORMATION ............................3 INTRODUCTION ..............................6 Product Description ..............................6 Intended use of the Product ............................6 Possible Mounting Options for the Bracket Pro Serie® 100 ..................7 Symbols and Definitions ...............................8 Warning / Caution / Note .............................9 Product Illustration ..............................10 BRACKET Pro Serie®... - Page 5 Table of Contents Warranty Policy ................................34 Warranty Options ...............................35 three Warranty Options for Technimount Products ..................35 International Warranty Clause ..........................35 RETURN POLICY ..............................36 Return of Merchandise ..............................36 Prior to 30 Days ..............................36 Prior to 45 Days ..............................36 Prior to 60 Days ..............................36 Return Merchandise Authorization ........................36 Damaged Merchandise ............................36 SAE CERTIFICATION .............................
-
Page 6: Introduction
Introduction This User Guide is designed to assist you with the installation, operation and maintenance of the Technimount Bracket Pro Serie 100 for the Crossvent ventilator from Bio-Med Devices. Please read this User Guide thoroughly before using this equipment. To ensure the safe operation of this equipment, it is recommended to train staff prior to use. PRODUCT DESCRIPTION The Bracket Pro Serie®... -
Page 7: Possible Mounting Options For The Bracket Pro Serie® 100
Introduction POSSIBLE MOUNTING OPTIONS FOR THE BRACKET PRO SERIE® 100 Safety MD Transporter Wall Mount Systems (EU) Floor Mount Technimount Air Ambulance Stretcher Safety Arm System Technimount Universal Wall Mount Systems (NA) Standard Base Return To Table of Contents www.technimount.com BP100 UG 202002-R01... -
Page 8: Symbols And Definitions
Introduction SYMBOLS AND DEFINITIONS SYMBOL DESCRIPTION Caution, special attention is required. Consult accompanying documents Safe working load symbol Pinch Point Load balance symbol Return To Table of Contents BP100 UG 202002-R01 www.technimount.com... -
Page 9: Warning / Caution / Note
Introduction WARNING / CAUTION / NOTE The word warning, caution, or note carry special meaning and should be carefully reviewed. SYMBOL DESCRIPTION Warning Alerts the reader about a situation which, if not avoided, could result in death or serious injury. It may also describe potential serious adverse reactions and safety hazards. -
Page 10: Product Illustration
Introduction PRODUCT ILLUSTRATION BRACKET PRO SERIE® 100 Front View Back Plate is Installed on the Medical Device First and then on the Main Assembly High-Density Aluminum with Silver- Anodized Finish Main Assembly on Which Plate and Medical Device Universal Standard Bottom are Installed Disc Compatible with all of Technimount’s Mounting Solutions... -
Page 11: Back View
Introduction PRODUCT ILLUSTRATION (CONTINUED) BRACKET PRO SERIE ® 100 (CONTINUED) Back View Back Plate is Installed on the Medical Device First and then on the Main Assembly Back Anti-Rotation Disc is used for High-Density Vertical Support Aluminum on Different Wall with Silver- or Arm Systems Anodized Finish... -
Page 12: Specifications
Introduction SPECIFICATIONS Product Name Bracket Pro Serie® 100 Crossvent Ventilator from Bio-Med Devices Compatibility of Medical Device EMS (Ground & Flight) – Hospital/Clinic, Military Environment of Usage High-Density Aluminum with Gray Anodized Finish – Acetal Feet Device Section Material Aluminum with Stainless Steel Insert and Peek Cushions Bottom Disc Section Material High-Density Aluminum with Gray-Anodized Finish Anti-Rotation Back Disc Material... -
Page 13: Notice
Technimount hereby declares that the Bracket Pro Serie® 100 Mounting System is in compliance with the essential requirements and other relevant provisions of the Directive 1999/5/EC and SAE J3043. A copy of the original declaration of conformity can be obtained by contacting Technimount System’s Regulatory Affairs Department: Technimount System C/O: Regulatory Affairs info@technimount.com... -
Page 14: Summary Of Safety Precautions
9 It is the responsibility of the operator of the Bracket or any of its options, to ensure equipment being used with the Technimount products meets the installation specifications. Injury may result if non-compatible products are used with Technimount System products. 9 Do not attempt to operate, install or remove the equipment while mobile. Ensure that installation and removal of equipment is done while vehicle or aircraft is immobilized. - Page 15 9 Inspect regularly all components on the equipment for any issue and loose screws, bolts and nuts. 9 Never install the mount into or on other similar mounting systems or brackets without written confirmation by Technimount System as these different systems may be from other brands or models and may not be compatible with Technimount Systems.
-
Page 16: Installation Guide
NOTE 9 Electrical tools are not recommended, as there is a potential risk of damage to the threads. 9 Technimount System provides screws with scotchgrip for the installation of the Back Plates and main assembly. Return To Table of Contents BP100 UG 202002-R01 www.technimount.com... -
Page 17: Installation Of The Bracket Onto The Crossvent Ventilator
Installation Guide INSTALLATION OF THE BRACKET ONTO THE CROSSVENT VENTILATOR 1. The Bracket Pro Serie® 100 is designed to be installed on the Crossvent ventilator. 2. Locate the metal plate on the back of the ventilator. This metal plate must be removed and will be replaced by the back plate from the bracket assembly. - Page 18 Installation Guide INSTALLATION OF THE BRACKET ONTO THE CROSSVENT VENTILATOR (CONTINUED) 5. Apply Blue Loctite 243 on the four (4) 1/4-20 x 3/4 in. hexagonal screws. 6. Put the back plate onto the back of the ventilator. Using the four (4) 1/4-20 x 3/4 in. hexagonal screws, attach the mounting plate to the back of the ventilator.
- Page 19 Installation Guide INSTALLATION OF THE BRACKET ONTO THE CROSSVENT VENTILATOR (CONTINUED) 12. While using a pair of pliers, hold each washer in between the back plate and the ventilator while tightening each screw. Do the same for all four screws. 13.
-
Page 20: Operation Guide
Operation Guide GENERAL OPERATING GUIDELINES FOR THE SAFETY MD TRANSPORTER 9 Use the Safety MD Transporter only as described in the User Guide. 9 Read all the labels and instructions on the product before using the Safety MD Transporter. 9 Always inspect the Micro Base and the Safety MD Transporter for any issue or damage before every use. -
Page 21: Operating The Bracket On The Safety Md Transporter
Operation Guide OPERATING THE BRACKET ON THE SAFETY MD TRANSPORTER INSTALLING THE BRACKET ONTO THE SAFETY MD TRANSPORTER 1. Only Technimount brackets with an anti-rotation micro disc on the back can be inserted into the Micro Base located on the Safety MD Transporter. 2. -
Page 22: Rotating The Bracket On The Safety Md Transporter
Operation Guide OPERATING THE BRACKET ON THE SAFETY MD TRANSPORTER (CONTINUED) INSTALLING THE BRACKET ONTO THE SAFETY MD TRANSPORTER (CONTINUED) 4. A Bracket Pro Serie 100 installed on the Safety MD Transporter. ROTATING THE BRACKET ON THE SAFETY MD TRANSPORTER 1. -
Page 23: Removing The Bracket With The Medical Device From The Safety Md Transporter
Operation Guide OPERATING THE BRACKET ON THE SAFETY MD TRANSPORTER (CONTINUED) REMOVING THE BRACKET WITH THE MEDICAL DEVICE FROM THE SAFETY MD TRANSPORTER 1. To remove the bracket from the Safety MD Transporter, press the red quick release button located on the back Micro Base. 2. -
Page 24: General Operating Guidelines For The Safety Arm System
Operation Guide GENERAL OPERATING GUIDELINES FOR THE SAFETY ARM SYSTEM 9 Use the Safety Arm System only as described in its User Guide. 9 Read all the labels and instructions on the product before using the Safety Arm System. 9 Always inspect the Clamp Block, Safety Pin, Lock Pin, and Surface Base before every use. -
Page 25: Operating The Bracket On The Safety Arm System
Operation Guide OPERATING THE BRACKET ON THE SAFETY ARM SYSTEM INSTALLING THE BRACKET ON THE STANDARD BASE 1. Only Technimount brackets with a standard bottom disc can be inserted into the surface Base located on the Safety Arm. 2. To insert the bracket into the standard surface base, slide into the base horizontally from the front of the base. -
Page 26: Removing The Bracket From The Standard Surface Base
Installation Guide OPERATING THE BRACKET ON THE SAFETY ARM SYSTEM (CONTINUED) REMOVING THE BRACKET FROM THE STANDARD SURFACE BASE 1. To remove the bracket from the Safety MD Transporter, press the red quick release button located on the back Standard Base. 2. -
Page 27: Part Numbers
Part Numbers KITS AND OTHER OPTIONS DESCRIPTION PART NUMBER Bracket Only 1200-10-CV 553-20-AB-WA Wall Mount Only 554-20-AB-FL Floor Mount Only 100-20-UN Unviersal Standard Base Several Models Available, Safety Arm System refer to Customer Service Different Models Available, Safety MD Transporter refer to Customer Service WARNING Do not modify any components of these system. -
Page 28: Maintenance Guide
Maintenance Guide CLEANING THE BRACKET SYSTEM CLEANING PROCESS The Bracket can be cleaned by using a pressure washer. The bracket may show some signs of oxidation or discoloration from continuous washing, however, degradation of the cot/stretcher’s performance or functionality will not be affected due to power washing if cleaning instructions are properly followed. -
Page 29: Removal Of Iodine Compounds
Maintenance Guide CLEANING THE BRACKET SYSTEM (CONTINUED) CLEANING SOLUTIONS CONTINUED WARNING 9 Some cleaning products are corrosive in nature and may cause damage to the product if used improperly. 9 If the products described are used to clean the equipment, the Bracket and components must be rinsed with clean water and thoroughly dried following cleaning. -
Page 30: Inspection Process And Schedule
Maintenance Guide INSPECTION PROCESS AND SCHEDULE MAINTENANCE PROGRAM The following inspection routine and schedule is intended as a general guide for preventive maintenance of the Bracket. Factors such as weather, environment, geographical location, and individual usage will necessitate different maintenance. If you are unsure as to how to perform these maintenance inspections or at what interval to perform these inspections, please contact your Technical Support Team at techsupport@technimount.com. -
Page 31: Inspection And Maintenance Record
Maintenance Guide INSPECTION AND MAINTENANCE RECORD PREVENTIVE MAINTENANCE DATE TIME PERFORMED Return To Table of Contents www.technimount.com BP100 UG 202002-R01... -
Page 32: Training Record
Maintenance Guide TRAINING RECORD TRAINING DATE TRAINING METHOD USER GUIDE, IN-SERVICE, BASIC TRAINING TRAINEE NAME IN-CLASS, TRAINING UPDATE ETC. Return To Table of Contents BP100 UG 202002-R01 www.technimount.com... -
Page 33: Replacement Parts
Maintenance Guide REPLACEMENT PARTS The parts and accessories listed are all currently available for purchase. Some of the parts identified on the assembly drawing parts in this user guide may not be individually available for purchase. Please call Technimount Customer Service or Technical Support : +1.581-998-9820 or at customerservice@technimount.com techsupport@... -
Page 34: Warranty
LIMITED RESPONSIBILITY AND WARRANTY Technimount System shall not be responsible for damage to the part or products resulting from improper installation or use, abuse, neglect, accident, servicing or any modification to any part of a Technimount product by anyone other than Technimount System or an organization certified by Technimount. -
Page 35: Warranty Options
Warranty WARRANTY OPTIONS THREE WARRANTY OPTIONS FOR TECHNIMOUNT PRODUCTS 1. One-year (1) additional warranty after the original warranty has expired for parts and labor has terminated. Technimount guaranties to the original purchaser that its products should be free from manufacturing nonconformities that affect product performance and customer satisfaction for a period of one (1) year following the end date of the original warranty. -
Page 36: Return Policy
Return Policy RETURN OF MERCHANDISE The parts and/or components may be returned up to 60 days of receiving the product(s) if they meet the following guidelines: PRIOR TO 30 DAYS 9 30-day money back guarantee 9 Technimount is responsible for all charges 9 Returns will not be approved on modified item 9 Charges may apply if damaged or missing items PRIOR TO 45 DAYS... -
Page 37: Sae Certification
SAE Certification Return To Table of Contents www.technimount.com BP100 UG 202002-R01... - Page 38 Technimount System - Brand of Technologies CGC Corporate Headquarters 3770 Jean Marchand Street, Suite 100 Quebec (QC) G2C 1Y6 Canada T + 1 581.998.9820 F + 1 855.339.6351 technimount.com info@technimount.com © 2020 Technimount System - All Rights Reserved Printed in Canada...