Operating The Bracket On The Safety Arm System; Installing The Bracket Onto The Standard Surface Base; Rotating The Bracket On The Standard Surface Base - Technimount System PRO 60-SD Series User Manual

OPERATING THE BRACKET ON THE SAFETY ARM SYSTEM

INSTALLING THE BRACKET ONTO THE STANDARD SURFACE BASE

1. Only Technimount brackets with a Standard
Bottom Disc can be inserted into the Standard
Surface Base located on the Safety Arm System.
2. To insert the bracket into the Standard Surface
Base, slide into the base horizontally from the
front of the base.
3. Ensure the bracket is locked securely in the
Standard Surface Base before manipulating the
device or transporting the stretcher.
ROTATING THE BRACKET ON THE STANDARD
SURFACE BASE
1. To rotate the medical device 360°, turn the
bracket inside the Standard Surface Base
clockwise or counter clockwise to use the device
in the desired position.
Return To Table of Contents
20
Operation Guide
BP60-SD UG 202109-01 www.technimount.com