SleepSafe Beds SleepSafe Product Assembly Manual

Manual electric combo

Hide thumbs Also See for SleepSafe:

Product assembly manual (20 pages)

Assembly manual (20 pages)

Manual (20 pages)

Table Of Contents

Quick Links

Download this manual

Manual Electric Combo

ELECTRIC

The Manual Electric Combo foundation elevates the head and knee sections of the bed, electrically

with a corded remote. The Hi-Lo feature uses a manual crank to raise and lower the foundation.



SleepSafeBed.com | 866.852.2337

3629 Reed Creek Drive | Bassett, VA 24055 | FDA Registered

PRODUCT & ASSEMBLY GUIDE

F O U N D A T I O N

ARTICULATION

SleepSafe

SleepSafe II

SleepSafer

 Dual View

SleepSafer

Dual View with Topper

HI-LO

FIXED

(Low Bed)

(Medium Bed)

(Tall Bed)

with Extension

MANUAL

Table of Contents

Need help?

Do you have a question about the SleepSafe and is the answer not in the manual?

Questions and answers

Summary of Contents for SleepSafe Beds SleepSafe

Page 1 The Manual Electric Combo foundation elevates the head and knee sections of the bed, electrically with a corded remote. The Hi-Lo feature uses a manual crank to raise and lower the foundation.  SleepSafe (Low Bed)  SleepSafe II (Medium Bed)  SleepSafer (Tall Bed)  Dual View ...
Page 2: Table Of Contents
Tools Needed Pre-Assembly Information Component Chart #1 Assembly Component Chart #2 Assembly Guide: SleepSafe Low Bed SleepSafe II Medium Bed Assembly Guide: SleepSafer Tall Bed SleepSafer Tall Bed Dual View Allen and Torx Wrenches Assembly Guide: SleepSafer Tall Bed (Supplied)
Page 3 BROKEN PARTS, TORN MESH, OR PADDING DO NOT SUBSTITUTE MATTRESS. IT IS INADEQUACIES. CONTACT SLEEPSAFE SPECIFICALLY DESIGNED AND FITTED FOR BEDS AT 866.852.2337 FOR ASSISTANCE. A SLEEPSAFE® BED AND ITS USER. SleepSafeBed.com | 866.852.2337 3629 Reed Creek Drive | Bassett, VA 24055 | FDA Registered...
Page 4 Included Components Assembly Cardboard Spacer 90 mm Allen Bolt 3/4” Hex Bolt Barrel Nut (If the bed is unpadded) T-12 T-12 40 mm F-18 F-18 Allen Bolt Q-18 Q-18 Allen / Torx Wrench Set (Various sizes) Square Bit Driver Casters (Attached) Extension Safety Latch...
Page 5 Included Components Assembly Manual Electric Combo Frame Crank Set: Extension, Crank, Bolt, Plugs Mattress Headboard Footboard Side Panel Front Panel Back Panel Safety Rail Extension End Panel Extension Side Panel Extension Topper...
Page 6: Sleepsafe Ii Medium Bed
Align and push in Barrel Nut as shown. Use flathead SleepSafe Bed (Low Bed) Side Panels use 8 Barrel Bolts screwdriver for SleepSafe II (Medium Bed) Side Panels use 12 Barrel Bolts assistance.  Attach Side Panels to foundation.
Page 7 90mm Allen Bolts to Side Panels) Once headboard and footboards are attached, remove SleepSafe Bed (Low Bed) uses (8) 90mm Bolts Casters cardboard spacers. SleepSafe II (Medium Bed) uses (12) 90mm Bolts are pre-installed Save for future use.
Page 8  SleepSafer (Tall Bed) Assembly Guide  SleepSafer (Dual View) After unpacking bed and checking the contents Set Manual FOOT Electric Combo  Foundation on HEAD 4 provided cardboard spacers. Reference Only. IMPORTANT! Crank installed in later step. CHECK THE BED ORDER FOR THE DESIRED LOCATION OF THE CRANK.
Page 9 Attach Headboard and Footboards to Panels. Fasten (6) 90mm Allen Bolts to each panel with 4mm Allen Wrench. Install Back Panel. Set in place with alignment Once headboard and pins, then fasten with Casters are footboards are attached, (2) 90mm Allen Bolts pre-installed remove cardboard spacers.
Page 10  SleepSafer (Tall Bed) Assembly Guide Open & Closed Extensions After unpacking bed and checking the contents Set Extension  Side Rails Upside Down Legs are upside down. and on their Legs. Assemble this with two people, otherwise one person can assemble one panel at a time after the the rest of the bed is assembled.
Page 11 This SleepSafer® Tall Bed Extension installation step is based on ordering it with the SleepSafer® Tall Bed. Retrofitting this Extension requires Loosen top additional instruction. bolts on all 4 bed posts. This allows play in the frame to fit the Extension. Set the â...
Page 12 Up and Down Safety Rail Adjustment  Does the Safety Rail Additional Tools Needed: POST Hammer or Mallet need adjustment? Portable Electric Drill For proper operation the pin should be centered in the strike. If not centered, follow the following steps to center the pin in the strike.
Page 13: Padding Information
SleepSafe Bed Padding Information Materials: • 70 Denier Nylon Fabric Cover with a Fluid Resistant Healthcare Coating • 3/4” High Density Foam Padding Padding Features: The safety rail pads extend up and over the rails and attach to the outside of the safety rails. The...
Page 14: Mattress Information
SleepSafe Bed Mattress Information SleepSafe Bed® – Our Specialized Memory Foam Mattress Matttress Cover with Gel Technology SleepSafe® Bed mattress support surfaces provides optimized pressure redistribution, rapid heat dissipation, and increases in breathability compared to standard foam. • Reduced incidence of pressure...
Page 15: Final Installation Checklist
The mattress should always fit snugly against the sides. If not, contact the DME or Customer Service at SleepSafe Beds. Check Bed Operation Knee should move up to 35° with the Remote.
Page 16: Operator's Guide
REMOVE Safety Rails securing the Safety Rails. from their down position. Gently lift the rail UP and OUT. Safety Rails on the SleepSafe (Low Bed), To ATTACH, place IN both strikes SleepSafe II (Medium Bed) and SleepSafer and let the rail DOWN.
Page 17 Yes, as a replacement for a SleepSafe® Bed mattress. We do not recommend using a SleepSafe® Bed mattress for another bed type. Our mattresses are designed and custom sized to fit inside a SleepSafe® Bed and may not be appropriate for other beds. Safety is our number one priority and our mattresses are designed to fit snugly within the wooden bed frame to reduce the chance of burrowing or entrapment.
Page 18: Warranty Information
Limited Five Year Warranty for SleepSafe® Bed Mattress During the second to fifth year, SleepSafe® Beds, LLC will replace the mattress due to a defect in the materials or workmanship of the mattress, with the shipping costs to be paid by purchaser.
Page 19: Dme Provider / Technical Support
DME Address ____________________________________ DME Phone ____________________________________ DME Email ____________________________________ Installed by ____________________________________ Customer Service & Technical Support SleepSafe Bed Support DME Provider Support Hours: 8 AM to 5 PM / M-F / EST DME: ________________________ Toll Free: 866.852.2337 Local: 276.627.0088 Conact: ______________________ Fax: 276.627.0234...
Page 20 SleepSafeBed.com | 866.852.2337 3629 Reed Creek Drive | Bassett, VA 24055 | FDA Registered WI-820.120-5 Manual Electric Combo [5] Rev. 01...

This manual is also suitable for:

Sleepsafe ii Sleepsafer Sleepsafe 2 Sleepsafe ii medium bed Sleepsafer with extension Electric articulation foundation sleepsafe ... Show all