Advertisement
Quick Links
Thank you for purchasing the SleepSafe Safety Bed. With proper care, your bed will provide years
of safe use. Carefully unpack all the contents of your bed and verify that all parts are included using
the following pages.
PLEASE CHECK ALL BOXES FOR HARDWARE BEFORE DISCARDING
WARRANTY AND USER INFORMATION CAN BE FOUND AT THE END OF THESE INSTRUCTIONS
TOOLS NEEDED:
Flat-Head Screwdriver
4mm Allen Wrench
(Provided)
!
3/8" Wrench
3/8" Wrench
!
At least 2 People
Advertisement
Related Manuals for SleepSafe Beds SleepSafer Fixed
Summary of Contents for SleepSafe Beds SleepSafer Fixed
- Page 1 Thank you for purchasing the SleepSafe Safety Bed. With proper care, your bed will provide years of safe use. Carefully unpack all the contents of your bed and verify that all parts are included using the following pages. PLEASE CHECK ALL BOXES FOR HARDWARE BEFORE DISCARDING WARRANTY AND USER INFORMATION CAN BE FOUND AT THE END OF THESE INSTRUCTIONS TOOLS NEEDED: Flat-Head Screwdriver...
- Page 2 (List of all the Items necessary for your Bed Assembly) (Detailed Instructions for Assemblying your Bed) (Extension/Topper Assembly Guide) (Detailed Instructions for adjusting Safety Rails) "...
- Page 3 90mm Allen Bolt Alignment Pin 15mm Allen Bolt Barrel Nut (Preinstalled on padded beds) ¼” Allen Wrench 4mm Allen Wrench T15 Torx Wrench T10 Torx Wrench...
- Page 4 Casters Aluminum Strikes Box Spring \ Bunkie Board Mattress Headboard Footboard Front Panel Back Panels Safety Rails...
- Page 5 Prepare Side Rails: Be sure the Barrel Nut slot perpendicular to the edge of the Side Rail. You may need a Flathead Screwdriver to help with the alignment. Attach Side Rails to Headboard & Footboard...
- Page 6 Attach Back Panel using Alignment Pins: Attach Back Panel using Alignment Pins: Attach Back Panel using Alignment Pins: Note: Place the alignment pins in the holes at the top of the side panel (Fig. A) then lower the back panel onto the pins (Fig. B). After the back panel is in position, secure with 90mm Allen Bolts using the 4mm Allen Wrench as you did in the...
- Page 7 Install Bunkie Board/Box Spring and Mattress: Install Safety Rails: Install Safety Rails: * Always install and remove Safety Rails while in their Lowered position.
- Page 8 90mm Allen Bolt 4mm Allen Wrench Curved End Piece Extension Side Rail Topper (Optional) Allen Screws (w/ Topper Only)
- Page 9 Set Extension Side Rails on Top of Legs: You will be assembling the Extension upside-down *Be sure Screens are facing in (as shown) Attach Extension Ends to Side Rails: Attach Ends with Curve Up (smiling) using the 90mm Allem Bolts and 4mm Allen Wrench provided:...
- Page 10 Flip Extension Assembly over: Flip Extension Assembly over: Curve-down (frowning) If you don’t have a Topper, skip Step #4: Attach Topper: Using the Allen Screws included...
- Page 11 Loosen Allen Bolts at Top of SleepSafer® Legs: Loosen Allen Bolts at Top of SleepSafer® Legs: Shown at “A” below: Loosening the Allen Bolts before adding the Extension allows for easier assembly and tighter fitting. If you have flip-up rails, be sure the proper legs match up before tightening all...
- Page 12 *Each Safety Rail is pre-adjusted at our factory, but it may become necessary to adjust the Safety Rail height over time. adjusted at our factory, but it may become necessary to adjust the Safety Rail height over time. TOOLS NEEDED: Rubber Mallet T10 Torx Wrench T15 Torx Wrench...
- Page 13 *Each Safety Rail is pre-adjusted at our factory, but it may become necessary to adjust the Safety Rail height over time. adjusted at our factory, but it may become necessary to adjust the Safety Rail height over time. Determine if your Safety Rails need adjustment: Safety Rails need adjustment: With the safety rail in the locked position, check With the safety rail in the locked position, check...
-
Page 14: Full One-Year Warranty
Limited Five-Year Warranty: During the second through fifth years from the date of purchase, SleepSafe Beds will replace any part found to be defective. Purchaser shall pay any service and shipping costs related to the replacement of the defective part.
Need help?
Do you have a question about the SleepSafer Fixed and is the answer not in the manual?
Questions and answers