Summary of Contents for SleepSafe Beds SleepSafe II
Page 1
Thank you for purchasing the SleepSafe Safety Bed. With proper care, your bed will provide years of Thank you for purchasing the SleepSafe Safety Bed. Thank you for purchasing the SleepSafe Safety Bed. With proper care, your bed will provide years of With proper care, your bed will provide years of safe use.
Page 2
(Parts required to Assemble your Bed) (Detailed Instructions for Assembling your Bed) (Up and Down) (Side to Side) "...
Page 3
90mm Allen Bolt ¾“ Hex Bolt Barrel Nut (Preinstalled on padded beds) 3mm Handle Bolt Handle Extension Cardboard Spacer ¼” Allen Wrench 4mm Allen Wrench 3mm Allen Wrench T15 Torx Wrench T10 Torx Wrench...
Page 5
Determine where your SleepSafe Bed® will be positioned: Depending on the placement of your bed, it may be necessary to move the Crank Assembly to the opposite side of the bed. If so, set the frame flat on the ground, remove the Assembly using the opposite side of the bed.
Page 6
Attach Side Rails: * The Side Rail with the holes goes on the side with the Crank Assembly Attach Headboard and Footboard to Side Rails: &...
Page 7
Install Casters and Remove Spacers * Once the caster is inserted, turn the tightening nut as shown above to compress the rubber sleeve on the stem inside the wood leg, thus preventing the caster from falling out. Install Mattress...
Page 8
Install Crank Handles: Install Crank Handles in the following order: 1. Crank Extension 2. Crank Handle 3. 3mm Bolt Install Safety Rails: * Always install and remove Safety Rails while in their LOWERED position.
Page 9
*Each Safety Rail is pre-adjusted at our factory, but it may become necessary to adjust the Safety Rail height over time. adjusted at our factory, but it may become necessary to adjust the Safety Rail height over time. TOOLS NEEDED: Rubber Mallet T10 Torx Wrench T15 Torx Wrench...
Page 10
*Each Safety Rail is pre-adjusted at our factory, but it may become necessary to adjust the Safety Rail height over time. adjusted at our factory, but it may become necessary to adjust the Safety Rail height over time. Determine if your Safety Rails need adjustment: Safety Rails need adjustment: With the safety rail in the locked position, check With the safety rail in the locked position, check...
Page 11
Chair Function (Head & Foot) (Up/Down) Head (Up/Down) Foot (Up/Down) (Up/Down) REMOTE LOCK OUT PROCEDURE: PRESS and HOLD BOTH DOWN BUTTONS on HEAD and FOOT articulation functions for about 5 seconds. The light on the remote will flash when it is locked. To UNLOCK repeat this procedure.
Limited Five-Year Warranty: During the second through fifth years from the date of purchase, SleepSafe Beds will replace any part found to be defective. Purchaser shall pay any service and shipping costs related to the replacement of the defective part.
Need help?
Do you have a question about the SleepSafe II and is the answer not in the manual?
Questions and answers