Hayward OmniLogic HTG-OL150c How-To Manual page 6

How To: Load a Config. Downloaded from Web
Use these steps to load a Configuration that has been downloaded from the web.
Step 1 Step 2
On the right of the dashboard locate and tap Select the "restore config" option (fourth
the "config" icon. down on the left most column).
Step 3 Step 4
Select where the file is stored, because this file Select downloaded file, if unchanged, it should
was loaded from the web onto a USB drive, show as "MspConfiguration.xml". Press the
select "Restore from USB". check to finalize.
6
NOTE: Plug-in the USB drive prior to starting this process.