Setting Up the Software
When you begin software setup, online instructions guide you
through the setup process.
IMPORTANT: After you begin software setup, you must complete
the entire process, which may require up to 20 minutes. Make sure
the computer is plugged in for this process to ensure that software
setup is uninterrupted.
CAUTION: To prevent file corruption and ensure the correct
software drivers are installed:
Operating the Computer During Setup
To move around the screen while making selections and
entering information:
press the Tab key,
press the cursor (arrow) keys, or
use the pointing device built into the computer keyboard.
To save your selections, press the Enter key or press one of the
mouse buttons on the computer keyboard.
To restore the screen if it is cleared by the screen saver during
a period of keyboard and mouse inactivity, press the Shift key.
For more information about using the built-in pointing device and
mouse buttons, refer to Chapter 3, "Using the Keyboard and
Pointing Device."
Choosing a Language
If you are prompted to select your language, choose carefully.
IMPORTANT: The languages that you do not choose will be deleted
from the computer and cannot be recovered.
Do not dock the computer in a docking station.
Do not turn off or unplug the computer or remove a drive
during software setup.
Getting Started 1-9