Turning On The Computer; Setting Up The Software - Compaq Armada 7700 Reference Manual

Turning On the Computer

To turn on the computer, slide the power switch
Whenever the computer is turned on, the power/suspend light
turns on to indicate that power is turned on.
NOTE: To restore the screen if it is blanked by the screen saver
during a period of keyboard and mouse inactivity, press the
key.
Turning On the Computer

Setting Up the Software

When you turn on the computer the first time, the Compaq setup
screen appears.
When you select to begin software setup, online instructions guide
you through the setup process.
After you select to begin software setup, you must
IMPORTANT:
complete the entire process, which may require up to 20 minutes.
CAUTION:
software drivers are installed:
Before you begin software setup, be sure the diskette drive is in
the computer and that the computer is not docked in a docking
station.
During software setup, do not turn off or unplug the computer or
remove a drive.
1-8 Getting Started
To prevent file corruption and ensure the correct
and release it.
Shift