Setting The Power Management Level; Power Management Levels - Compaq Armada 7800 Reference Manual

Setting the Power Management Level

Power Management Levels

To extend the life of your battery packs, use the Battery
Conservation tab in Power Properties. You can customize the
level of battery conservation or use one of four power
management levels:
High—Select this level for the maximum amount of power
conservation possible in an automatic setting. Using this level,
you receive the most battery operating time from a single
charge.
Medium—Select this level for a balance between performance
and battery operating time. This is the default setting.
Custom—Select this level to customize timeout settings for:
Windows 95
Suspend
System idle
Screen save
Processor speed
Brightness
: The custom level default settings are the same as the
NOTE
medium level until you set your own values.
None (Drain)—Provides the maximum battery drain because
battery conservation is turned off. The computer runs at full
speed if no power conservation level is selected.
Windows NT
Suspend
Hard disk idle
System idle
Screen save
Processor speed
Brightness
Using Power and Power Management 4-3