Planmeca ProOne Manual page 33

First attach a ferrite bead (included in the delivery) to the exposure switch cable. Then
connect the exposure switch cable to either of the two terminals in the middle (marked
EXP).
NOTE
Only the exposure switch cable can be connected to the terminals in the middle. Do not
connect any other cables to these terminals.
NOTE
The left hand side terminal is a USB port and it is reserved for a USB memory stick. Do not
plug any other USB devices into the USB port.
E
Back of
moving column
Connect the other cable end to the exposure switch.
Installation Manual
Screws that hold the protective cover in position
F
8 INSTALLING THE EXPOSURE SWITCH
Planmeca ProOne
Ferrite bead
Exposure
switch cable
31