Identity Code - ProMinent Sigma / 2 Basic Type SBKa Operating Instructions Manual

Identity code

1 Identity code
SBKa Sigma 2 Basic Type
HK Main power end, piston
Type: Capacity
_ _ _ _ Performance data at maximum back pressure and type: refer to nameplate on the pump
_ housing
Dosing head material
SS
4
Stainless steel
Seal material
T PTFE
Displacement body
4 Piston (oxide ceramic)
Dosing head design
0 no valve springs
1 with 2 valve springs, Hastelloy C; 0.1 bar
Hydraulic connector
0 Standard threaded connector (in line with technical data)
Design
0
1
M
With ProMinent logo (standard)
®
Without ProMinent ® logo
Modified* * order-related design, refer to
order paperwork for pump
features
Electric power supply
_ Connection data - see motor nameplate
1 No motor, with B14 flange, size 71 (DIN)
2 No motor, with C 56 flange (NEMA)
3 No motor, with B 5, size 63 (DIN)
4 No motor, with B 5, size 71 (DIN)
5 No motor, with B14 flange, size 80 (DIN)
Degree of protection
0 IP 55 (standard)
1 Exe design ATEX-T3
2 Exd version ATEX-T4
Stroke sensor
0 No stroke sensor (standard)
2 Pacing relay (reed relay)
3 Stroke sensor (Namur) for haz‐
ardous locations
Stroke length adjustment
0 Manual (standard)
1 With servomotor, 230 V,
50/60 Hz