Introduction; Safety - Lippert Components Innolight Sliding Installation And Owner's Manual

Introduction

The Innolight sliding electric step is built with 80 percent
plastic parts and 20 percent steel and aluminum. The
step is durable, resistant to corrosion and lightweight. The
unit has a thermal breaker in case of high strain, and the
footboard is constructed of anodized aluminum with anti-
slip rubber.
Additional information about this product can be obtained
from lippertcomponents.eu/support/
myLCI app. Replacement kits can be ordered from
lippertcomponents.eu/product-catalog
myLCI app.
The myLCI app is available for free on iTunes
and iPad and also on Google Play
®
iTunes , iPhone , and iPad
® ®
Apple Inc.
Google Play and Android
™
lci1.com
or by using the
or by using the
for iPhone
®
for Android
™ ™
are registered trademarks of
®
are trademarks of Google Inc.
™
574-537-8900
Innolight Sliding
Electric Step
Installation and Owner's Manual
(For Aftermarket Applications)

Safety

Read and fully understand all instructions before installing
or operating this product. Adhere to all safety labels. This
manual provides general instructions. Many variables can
change the circumstances of the instructions, i.e., the
degree of difficulty, operation and ability of the individual
performing the instructions. This manual cannot begin
to plot out instructions for every possibility, but provides
the general instructions, as necessary, for effectively
nterfacing with the device, product or system. Failure
to correctly follow the provided instructions may result
in death, serious personal injury, severe product and/
or property damage, including voiding of the LCI limited
®
warranty.
users.
THE "WARNING" SYMBOL ABOVE IS A SIGN THAT
A SAFETY RISK IS INVOLVED AND MAY CAUSE
DEATH, SERIOUS PERSONAL INJURY AND/OR
SEVERE PRODUCT OR PROPERTY DAMAGE IF NOT
SAFELY ADHERED TO AND WITHIN THE
PARAMETERS SET FORTH IN THIS MANUAL.
THE "CAUTION" SYMBOL ABOVE IS A SIGN THAT
A PROCEDURE HAS A RISK INVOLVED THAT MAY
CAUSE PERSONAL INJURY AND/OR PRODUCT
DAMAGE IF NOT PERFORMED SAFELY AND WITHIN
THE PARAMETERS SET FORTH WITHIN THIS
MANUAL.
DO NOT STEP ON A RETRACTED STEP. USING A
RETRACTED STEP CAN CAUSE PERSONAL INJURY
AND/OR SEVERELY DAMAGE THE MOTOR. EXTEND
THE STEP TO SAFELY USE THE PRODUCT AS
INTENDED.
MOVING PARTS CAN PINCH, CRUSH OR CUT. KEEP
CLEAR AND USE CAUTION.
2
CCD-0002550 Rev: 11.18.19