Using A Frame Pattern To Create Appliqués (2) - Brother PE-600II User Manual

APPENDIX —————————————————————————————————————————————————————
3 Lightly apply fabric glue or spray adhesive to
the back of the appliqué piece that was cut
1
out in step , and then attach the appliqué
piece to the base fabric.
4 Select the satin-stitched frame pattern with
the same shape to embroider the appliqué
3
attached in step
1 Appliqué
Note
● If the size or sewing position of the straight-
stitched frame pattern is changed, be sure to
change the size or sewing position of the
satin-stitched frame pattern in the same
way.
158
.
1
Using a frame pattern to
create appliqués (2)
There is another way of sewing appliqués. With this
method, there is no need to change the fabric in the
embroidery frame. The appliqué can be created by
sewing two frame patterns of the same size and
shape—one sewn with straight stitches and the other
sewn with satin stitches.
Select a frame pattern sewn with straight
1
stitches to embroider onto the base fabric.
2 Place the appliqué fabric over the embroidery
1
sewn in step . Make sure that the area
surrounded by the stitching is not larger than
the area of the appliqué fabric.