If The Lcd Cannot Be Read; If The Machine Does Not Respond When A Key Is Pressed - Brother PE-600II User Manual

If the LCD cannot be read

If the LCD cannot be read after the machine is turned
on, adjust the LCD as described below.
1 While touching anywhere inside the touch
panel turn the machine off, then on again.
• Continue touching the touch panel until the
screen shown below appears.
• The start/stop button does not light up.
2 Touch and
of the screen so that the contents of the
screens can be clearly viewed.
3 After making the necessary adjustment, turn
the machine off, then on again.
to adjust the brightness
If the machine does not
respond when a key is pressed
If nothing happens when a key on the screen is
touched (no key can be selected or the keys are
misaligned), adjust the touch panel as described
below.
1 Touch anywhere inside the touch panel, and
turn the machine off, then on again.
• Continue touching the touch panel until the
screen shown below appears.
• The start/stop button does not light up.
The screen shown below appears.
2 Press the thread trimming button.
The adjustments screen appears.
Troubleshooting 213
7