Brother PE-600II User Manual page 158

■ Page 3
A RESERVED NEEDLE
A certain thread color can be set to a specific
needle bar. The specified color remains assigned
to the needle bar specified here until the setting is
cancelled. For details on specifying these settings,
refer to "Reserved Needle Bar Settings" on
page 96.
■ Page 4
B CUSTOM THREAD TABLE
Create a Custom Thread Table from this page. For
details on create a Custom thread table, refer to
"Custom thread table settings" on page 147.
■ Page 5
C BRIGHTNESS OF LCD
Enables the density or brightness of the screen to
be adjusted.
D BUZZER
Turns the buzzer on or off.
E UNIT
Enables the units of measurements that appear in
the screens to be changed.
F LANGUAGES
Enables the display language to be changed. The
keys and messages appear in the selected
language.
Details of each of the settings are described in the
following sections. After specifying the desired
settings, touch to return to the screen that
was displayed before the settings screen was
displayed.
Using the Settings Key
6
141