Table of Contents
Advertisement
6
Assembly and installation
6.1 Reactor
Fig. 5: Reactor
I.
Inlet
II. Outlet
6.1.1 Assembly
Fitting position
6.1.2 Attaching the Warning Sign and Nameplate to the Reactor
User qualification, mechanical installation: trained and qualified
n
Ä Chapter 2.2 'User qualification' on page 8
personnel,
User qualification, electrical installation: Electrical technician,
n
Ä Chapter 2.2 'User qualification' on page 8
NOTICE!
Maintenance work
Leave adequate clearance for maintenance work.
The required clearance for maintenance work, e.g.
replacing lamp protection tubes, can be found in
the dimensional drawing,
sional drawing' on page 40
Fix the reactor in place with appropriate fixing material (pipe clamp,
frame). The fitting position can, in principle, be chosen at random
and, if required, can be adapted to conditions on site.
NOTICE!
Attach the self-adhesive warning label supplied to
the reactor so that it is clearly visible.
Attach the "Caution UV radiation" warning sign and the "160°
opening angle" label directly adjacent to the sensor con‐
nector.
Assembly and installation
Ä Chapter 10.2 'Dimen‐
A2292
21
Advertisement
Table of Contents
