Table of Contents
Advertisement
Commissioning
7.3 Switching on the UV system
Fig. 7: Function of operating keys
1. Mains switch
2. Bridge for remote operation in AUTO operating mode
Selecting operating level L
28
Bridge in terminal 7/8
If the control is not controlled externally, the ter‐
minal 7/8 must be bridged (2).
2.
1.
Switch the device on. Switch the mains switch (1) or main
switch on the control cabinet to ON.
ð All 3 LEDs light up in quick succession.
The software version number appears in the display fol‐
lowed by the operating modes
(Automatic). In Manual, the display shows an
radiation intensity; in Automatic, the display indicates the
current operating level
[P] to select operating mode [OFF] .
2.
Use
ð When the control is controlled externally,
appears in Automatic operating mode to make differentia‐
tion possible.
The control must be in [OFF] operating mode.
3.
Press ⇑ and release it again.
ð The O-w 0.0 key symbol appears.
4.
Enter 2.3 and confirm it with
1.
[OFF] , [M] (Manual) or [A]
[H] and the
[L5] and the radiation intensity.
[AUTO-OFF]
[OK] .
A2299
Advertisement
Table of Contents
