Editing Samples; Change The Order Of Samples In The Chain - Arturia VOCODER V User Manual

5.4. Editing Samples

Beyond loading and arranging samples, you can edit samples with either Keyboard or Cycle
mode selected. Editing operations apply to individual samples, not globally, even if the same
sample is in more than one cell.
To enter edit mode, hover over a sample until the Pencil (edit) icon appears, then click on the
cell. To exit edit mode, click on Back to Play Mode, toward the upper left.

5.4.1. Change the Order of Samples in the Chain

Click on a cell and drag it to the desired position. In the image above, cell 4 is being dragged
between cells 7 and 8. When you change a sample's position it retains its color coding,
however, its number will change to reflect the new position in the sample chain.
To swap samples, drag one cell on top of another cell (e.g., if you drag cell 8 on top of cell 2,
cell 2 will now contain the sample that was in cell 8, and cell 8 will contain the sample that
was in cell 2).
36 Arturia - User Manual Vocoder V - Voice page