Clock Functions - Progress PHP5325X User Manual

12 Progress

CLOCK FUNCTIONS

Clock functions table
Clock function
COUNT UP TIMER
TIME OF DAY
DURATION
END
SET+GO
Count Up Timer
The Count Up Timer is not
activated if Duration and End are
set.
The Count Up Timer starts to count when
the appliance starts to heat.
1. To reset the Count Up Timer, touch
2. Touch until the display shows
"00:00" and the Count Up Timer starts
to count up again.
Setting the DURATION
1. Activate the appliance and set an oven
function and temperature.
2. Touch again and again until the
display shows
flashes in the display.
3. Use or to set the minutes for
DURATION.
4. Touch to confirm.
5. Use or to set the hours for
DURATION.
Application
To set the count up, which shows how long the appliance
operates. This function has no effect on the operation of the
appliance.
To show the time of day. To change the time of day, refer to
"Setting the time".
To set how long the appliance operates.
To set when the appliance deactivates. You can use Dura-
tion and End at the same time (Time delay) if you want the
appliance to activate and deactivate automatically later.
To start the appliance with necessary settings with only one
touch of the sensor field any time later.
.
If you touch
you set the DURATION, the
appliance switches to the
setting of the END function.
6. When the set time ends, an acoustic
signal sounds for two minutes.
and time setting flash in the display. The
appliance deactivates.
.
7. Touch a sensor field or open the oven
door to stop the acoustic signal.
8. Deactivate the appliance.
Setting the END
1. Activate the appliance and set an oven
function and temperature.
2. Touch again and again until the
display shows
flashes in the display.
3. Use or
or to confirm. First you set the
minutes and then the hours.
When the set time ends, an acoustic signal
sounds for two minutes.
time setting flash in the display. The
appliance deactivates.
4. Touch a sensor field or open the oven
door to stop the acoustic signal.
5. Deactivate the appliance.
or while
.
to set the END and
symbol and the