Table of Contents
Advertisement
Cleaning and Preventative Maintenance
Preventative Maintenance Program
(perform monthly)
1 . Clean all condenser coils .
Condenser coils are a critical components in the life of
the compressor and must remain clean to ensure proper
air flow and heat transfer .
Clean the condenser coils with a coil cleaner and/or
a vacuum, cleaner, and a brush . Brush the coil in the
direction of the fins .
2 . Clean the fan blade on the condensing unit .
The fan blade collects dust and transfers the dust into
the condenser coils . Clean the fan blade with a vacuum,
cleaner, and a brush .
3 . Inspect the condition of the plug and cord and replace if
damaged .
4 . Check the condition of the control panel overlay . Are
there any tears or excessive wear on the graphic?
Replace if necessary .
NOTICE: Do not use sharp utensils .
Use of any filter over the condenser coil may
result in poor performance of the appliance .
The factory does not recommend the use of any
auxiliary filter . Any failures of the appliance as
a result of an auxiliary filter will not be covered
under warranty .
22
MN-36033 • Rev 3 • 04/19 • Cold Food Drop-In Well Manual
Advertisement
Table of Contents
