Summary of Contents for ZKTeco SpeedFace-V5L Series
Page 1
ProFace X [TD] User Manual User Manual SpeedFace-V5L Series Date: July 2020 Doc Version: 1.0 English Thank you for choosing our product. Please read the instructions carefully before operation. Follow these instructions to ensure that the product is functioning properly. The images shown in this manual are for illustrative purposes only.
Page 3
SpeedFace-V5L Series User Manual relating to the use of the information contained in or referenced by this manual, even if ZKTeco has been advised of the possibility of such damages. This manual and the information contained therein may include technical, other inaccuracies or typographical errors.
Page 4
User Manual About the Company ZKTeco is one of the world’s largest manufacturers of RFID and Biometric (Fingerprint, Facial, and Finger- vein) readers. Product offerings include Access Control readers and panels, Near & Far-range Facial Recognition Cameras, Elevator/floor access controllers, Turnstiles, License Plate Recognition (LPR) gate controllers and Consumer products including battery-operated fingerprint and face-reader Door Locks.
Page 5
SpeedFace-V5L Series User Manual Document Conventions Conventions used in this manual are listed below: GUI Conventions For Device Convention Description <> Button or key names for devices. For example, press <OK> Window names, menu items, data table, and field names are inside square brackets.
SpeedFace-V5L Series User Manual Table of Contents OVERVIEW ............................7 INSTRUCTIONS TO USE ........................7 2.1 F ............................7 INGER OSITIONING 2.2 S ..............8 TANDING OSITION ACIAL XPRESSION AND TANDING OSTURE 2.3 P ............................9 EGISTRATION 2.4 F ............................10 EGISTRATION 2.5 S...
Page 7
SpeedFace-V5L Series User Manual 8.3 B ............................61 CHEDULES 8.4 P ..........................63 UNCH TATES PTIONS 8.5 S ........................... 64 HORTCUT APPINGS DATA MANAGEMENT ........................65 9.1 D ..............................65 ELETE ACCESS CONTROL .......................... 67 10.1 A ........................... 68 CCESS...
User Manual Overview This document describes the operating procedure of SpeedFace-V5L Series device. The operating modules of the device include User management, User role assignment, Device communication, Temperature and Mask detection, Access control, and so on. The device supports hassle-free access of users into the premises without compromising any security aspect thus ensuring protection.
SpeedFace-V5L Series User Manual Standing Position, Facial Expression and Standing Posture Recommended distance The distance between the device and a user whose height is within 1.55m-1.85m is recommended to be 0.3 to 2m. Users may slightly move forwards and backwards to improve the quality of facial images captured.
SpeedFace-V5L Series User Manual Note: During enrollment and verification, please keep natural facial expression and standing posture. Palm Registration Place your palm in the palm multi-mode collection area, such that the palm is placed parallel to the device. Make sure to keep space between your fingers.
SpeedFace-V5L Series User Manual Face Registration Try to keep the face in the center of the screen during registration. Please face the camera and stay still during face registration. The page looks like shown below: Face registration and authentication methods Instructions to register a face •...
SpeedFace-V5L Series User Manual • If a part of the face is covered with a hat, a mask, an eye patch, or sunglasses authentication may fail. Do not cover the face, allow the device to recognize both the eyebrows and the face.
SpeedFace-V5L Series User Manual Virtual Keyboard Note: The device supports the input of Chinese and English characters, numbers, and symbols. Click [En] to switch to the English keyboard. Press [123] to switch to the numeric and special character keyboard, and click [ABC] to return to the alphabetic keyboard. Click the input box, and the virtual keyboard appears.
SpeedFace-V5L Series User Manual Verification Mode 2.7.1 Palm Verification 1:N (One to Many) Palm Verification mode This verification mode compares the palm image collected by the palm module with all the palm data template in the device. The device will automatically distinguish between the palm and face verification mode. Place the palm in the area that can be collected by the palm module, so that the device will automatically switch to palm verification mode.
Page 16
SpeedFace-V5L Series User Manual If the user has registered the fingerprint, face and password in addition to palm, and the verification method is set to palm/ fingerprint/ face/ password, the following screen will appear. Select the palm icon to enter palm verification mode.
SpeedFace-V5L Series User Manual 2.7.2 Fingerprint Verification 1:N (One to Many)Fingerprint Verification Mode Compares the fingerprint that is being pressed onto the fingerprint reader with all of the fingerprint data that is stored in the device. The device will enter the fingerprint authentication mode when a user presses his/her finger onto the fingerprint scanner.
Page 18
SpeedFace-V5L Series User Manual Verification is failed: 1:1 (One to One ) Fingerprint Verification mode Compares the fingerprint that is being pressed onto the fingerprint reader with the fingerprints that are linked to User ID input via the virtual keyboard.
Page 19
SpeedFace-V5L Series User Manual If the user has registered plam, face and password in addition to his/her fingerprints, and the verification method is set to palm/ fingerprint/ face /password verification, the following screen will appear. Select the fingerprint icon to enter fingerprint verification mode.
SpeedFace-V5L Series User Manual Verification is failed. 2.7.3 Facial Verification 1:N (One to Many)Facial Verification Conventional verification This verification mode compares the acquired facial images with all the face data registered in the device. The following is the pop-up prompt box of the comparison result.
Page 22
SpeedFace-V5L Series User Manual Enable temperature screening with infrared ★ When the user enabled the Enable temperature screening with infrared function, during user verification, in addition to the conventional verification method, the user's face must be aligned with the temperature measurement area to measure the body temperature before the face is verified. The following is the popup of the comparison result prompt interface.
Page 23
SpeedFace-V5L Series User Manual Enable mask detection★ When the user enabled the Enable mask detection function, the device will identify whether the user is wearing a mask or not. The following is the popup of the comparison result prompt interface.
Page 24
SpeedFace-V5L Series User Manual 1:1 (One to One) Facial Verification This Verification mode compares the face captured by the camera with the facial template related to the entered user ID. Press on the main interface and enter the 1:1 (One to One) facial verification mode.
SpeedFace-V5L Series User Manual 2.7.4 Password Verification The Password Verification mode compares the entered password with the registered User ID and Password. Click the button on the main screen to open the 1:1 (One to One) password verification mode. Input the user ID and press [OK].
Page 31
SpeedFace-V5L Series User Manual Note: 1) "/" means “or”, and "+" means “and”. 2) You must register the required verification information before using the combination verification mode, otherwise, the verification may fail. For example, if a user uses Face Registration but the verification mode is Face + Password, this user will never pass verification.
SpeedFace-V5L Series User Manual Main Menu Press on the initial interface to enter the main menu, as shown below: Menu Description User Mgt. To add, edit, view, and delete the basic information about a user. To set the permission scope of the custom role and enroller, that is, the rights to User Role operate the system.
SpeedFace-V5L Series User Manual User Management Add Users Click User Mgt. on the main menu. Click New User. Register a User ID and Name Enter the User ID and Name. Notes: 1) A username may contain 17 characters. 2) The user ID may contain 1 to 9 digits by default.
Page 34
SpeedFace-V5L Series User Manual 3) During the initial registration, you can modify your ID, which cannot be modified after registration. 4) If a message "Duplicated ID" pops up, you must choose another ID. Setting the User Role There are two types of user accounts: Normal user and Super admin. If there is already a registered administrator, the normal users have no rights to manage the system and may only access authentication verifications.
Page 36
SpeedFace-V5L Series User Manual Register palm Click Palm to open the palm registration page. Select the palm to be enrolled. Register face Click Face to enter the face registration page. Please face the camera and stay still during face registration.
SpeedFace-V5L Series User Manual Note: The password may contain one to eight digits by default. Register user photo When a user registered with a photo passes the authentication, the registered photo will be displayed. Click User Photo; click the camera icon to take a photo. The system will return to the New User interface after taking a photo.
SpeedFace-V5L Series User Manual Note: The operation of editing a user is the same as that of adding a user, except that the user ID cannot be modified when editing a user. For further details, refers "4.1 Add users". Delete Users Select a user from the list and click Delete to enter the delete user interface.
SpeedFace-V5L Series User Manual User Role If you need to assign some specific permissions to certain users, you may edit the “User Defined Role” under the User Role menu. You may set the permission scope of the custom role (up to 3 roles) and enroller, that is, the permission scope of the operation menu.
Page 43
SpeedFace-V5L Series User Manual Note: During the privilege assignment, the main menu is on the left and its sub-menus are on the right. You only need to select the features in sub-menus. If the device has a role enabled, you may assign the roles you set to users by clicking User Mgt.
SpeedFace-V5L Series User Manual Communication Settings Communication Settings are used to set the parameters of the Network, PC connection, Cloud server, and Wiegand. Tap COMM. on the main menu. Network Settings When the device needs to communicate with a PC over the Ethernet, you need to configure network settings and ensure that the device and the PC are connecting to the same network segment.
Page 45
SpeedFace-V5L Series User Manual Feature Description The factory default value is 192.168.1.201. Please set the IP Address as per the IP Address requirements. The factory default value is 255.255.255.0. Please set the value as per the Subnet Mask requirements. The factory default address is 0.0.0.0. Please set the value as per the Gateway requirements.
SpeedFace-V5L Series User Manual PC Connection To improve the security of data, please set a Comm Key for communication between the device and the If a Comm Key is set, this connection password must be entered before the device can be connected to the PC software.
SpeedFace-V5L Series User Manual Menu Description Enable When this function is enabled, the domain name mode “http://...” Domain Server Address will be used, such as http://www.XYZ.com, while “XYZ” denotes the domain name when this mode is turned ON. Name Disable Server Address IP address of the ADMS server.
Page 48
SpeedFace-V5L Series User Manual Wiegand Input Menu Name Descriptions Wiegand Format Values range from 26 bits, 34 bits, 36 bits, 37 bits, and 50 bits. Wiegand Bits Number of bits of Wiegand data. The value of the pulse width sent by Wiegand is 100 microseconds by default, Pulse Width(us) which can be adjusted within the range of 20 to 100 microseconds.
Page 49
SpeedFace-V5L Series User Manual ESSSSSSSSCCCCCCCCCCCCCCCCO Consists of 26 bits of binary code. The 1 bit is the even parity bit of the 2 to 13 Wiegand26a bits, while the 26 bit is the odd parity bit of the 14 to 25 bits.
Page 50
SpeedFace-V5L Series User Manual Wiegand output Menu Name Descriptions When SRB is enabled, the lock is controlled by the SRB to prevent the lock from being opened due to device removal. Wiegand Format Values range from 26 bits, 34 bits, 36 bits, 37 bits, and 50 bits.
SpeedFace-V5L Series User Manual System Settings The System Settings is used to set the related system parameters to optimize the performance of the device. Click System on the main menu interface. Date and Time Click Date Time on the System interface.
SpeedFace-V5L Series User Manual When restoring the factory settings, the time (24-hour) and date format (YYYY-MM-DD) can be restored, but the device date and time cannot be restored. Note: For example, the user sets the time of the device (18:35 on March 15, 2019) to 18:30 on January 1, 2020.
SpeedFace-V5L Series User Manual When the remaining record space reaches a preset value, the device will Access Logs Warning automatically display a warning. Users may disable the function or set a valid value between 1 and 9999. When access records have reached the full capacity, the device will Circulation Delete automatically delete a set value of old access records.
Page 54
SpeedFace-V5L Series User Manual Menu Name Description Under 1:N (One to Many) verification mode, the verification will only be successful when the similarity between the acquired facial image and all registered facial templates is greater than the set value. 1:N (One to Many) Match Threshold The valid value ranges from 65 to 120.
SpeedFace-V5L Series User Manual A measurement of the amount of change in a camera’s field of view that qualifies as potential motion detection that wakes up the terminal from Motion Detection standby to the comparison interface. The larger the value, the more sensitive Sensitivity the system would be, i.e.
SpeedFace-V5L Series User Manual Under 1:N verification method, the verification will only be successful when the 1:N Match similarity between the acquired fingerprint data and the fingerprint templates Threshold enrolled in the device is greater than the set value. To set the sensibility of fingerprint acquisition. It is recommended to use the default level “Medium”.
SpeedFace-V5L Series User Manual Temperature Detection Management Click Detection Management on the System interface. Menu Name Description To enable or disable the infrared temperature measurement function. Enable temperature When this function is enabled, before the access is granted, users must pass screening with the temperature screening in addition to identity verification.
Page 59
SpeedFace-V5L Series User Manual As the temperature measurement module allows a small range of errors Temperature (disturbance) of an observed value under different environments (humidity, deviation correction room temperature and such), users may set the deviation value here. The unit of body temperature can be switched between Celsius (℃) and Temp.
SpeedFace-V5L Series User Manual Personalize Settings You may customize the interface settings, audio, and bell. Click Personalize on the main menu interface. Interface Settings You can customize the display style of the main interface. Click User Interface on the Personalize interface.
Page 61
SpeedFace-V5L Series User Manual Menu Description Wallpaper To select the main screen wallpaper according to your personal preference. Language To select the language of the device. When there is no operation, and the time exceeds the set value, the device will Menu Screen automatically go back to the initial interface.
SpeedFace-V5L Series User Manual Voice Settings Click Voice on the Personalize interface. Menu Name Description Voice Prompt Select whether to enable voice prompts during operation. Touch Prompt Select whether to enable keypad sounds. Volume Adjust the volume of the device; valid value: 0 to 100.
Page 63
SpeedFace-V5L Series User Manual Add a bell Click New Bell Schedule to enter the adding interface: Menu Name Description Bell Status Set whether to enable the bell status. Bell Time At this time of day, the device automatically rings the bell.
SpeedFace-V5L Series User Manual Punch States Options Click Punch States Options on the Personalize interface. Menu Name Description Select a punch state mode, which can be: Off: To disable the punch state key function. The punch state key set under Shortcut Key Mappings menu will become invalid.
SpeedFace-V5L Series User Manual Shortcut Keys Mappings Users may define shortcuts as attendance status or functional keys. On the main interface, when the shortcut keys are pressed, the corresponding attendance status or function interface will quickly display. Click Shortcut Key Mappings on the Personalize interface.
SpeedFace-V5L Series User Manual Data Management The Data Management is used to delete the relevant data in the device. Click Data Mgt. on the main menu interface. Delete Data Click Delete Data on the Data Mgt. interface. Menu Name Description Delete Access Records To delete the attendance data/access records conditionally.
Page 67
SpeedFace-V5L Series User Manual users. Delete Admin Role To remove the administrator privileges. Delete Access Control To delete all the access data. Delete User Photo To delete all the user photos in the device. Delete Wallpaper To delete all the wallpapers in the device.
SpeedFace-V5L Series User Manual Access Control Access Control is used to set the schedule of a door opening, locks control and other parameter settings related to access control. Click Access Control on the main menu interface. To gain access, the registered user must meet the following conditions: The current door unlock time should be within any valid time zone of the user time period.
SpeedFace-V5L Series User Manual 10.1 Access Control Options This option is used to set the parameters of the control lock of the device and the related parameters. Click Access Control Options on the Access Control interface. Menu Name Description Gate Control Mode Whether to turn on the gate control mode or not.
SpeedFace-V5L Series User Manual Door available time To set a time period for the door, so that the door is accessible only during period this time period. Normal open time Scheduled time period for “Normal Open” mode, so that the door is always Period unlocked during this period.
SpeedFace-V5L Series User Manual Notes: 1) When the ending time is earlier than the starting time, such as 23:57~23:56, it indicates that access is prohibited all day; when the ending time is later than the starting time, such as 00:00~23:59, it indicates that the interval is valid.
SpeedFace-V5L Series User Manual Add a New Holiday Click Add Holiday on the Holidays interface and set the holiday parameters. Edit a Holiday On the Holidays interface, select a holiday item to be modified. Click Edit to modify holiday parameters.
Page 74
SpeedFace-V5L Series User Manual Click the door-unlocking combination to be set. Click the up and down arrows to input the combination number, then press OK. Examples: The door-unlocking combination 1 is set as (01 03 05 06 08), indicating that the unlocking combination 1 consists of 5 people, and the 5 individuals are from 5 groups, namely, access control group 1 (AC group 1), AC group 3, AC group 5, AC group 6, and AC group 8, respectively.
SpeedFace-V5L Series User Manual 10.5 Anti-Passback Setup It is possible that users may be followed by some persons to enter the door without verification, resulting in security problem. So, to avoid this situation, Anti-Passback option is developed. Once it is enabled, the check-in record must match with check- out record so as to open the door.
SpeedFace-V5L Series User Manual can check out again; otherwise, the alarm will be triggered. 10.6 Duress Options Settings If a user activated the duress verification function with specific authentication method(s), when he/she is under coercion during authentication with such method, the device will unlock the door as usual, but at the same time a signal will be sent to trigger the alarm.
SpeedFace-V5L Series User Manual Attendance Search When the identity of a user is verified, the record will be saved in the device. This function enables users to check their access records. Click Attendance Search on the main menu interface. The process of searching for attendance and blocklist photos is similar to that of searching for access records.
Page 78
SpeedFace-V5L Series User Manual 1. Enter the user ID to be searched and click OK. If 2. Select the time range in which the records you want to search for records of all users, click OK you want to search for.
SpeedFace-V5L Series User Manual Autotest To automatically test whether all modules in the device function properly, which include the LCD, Audio, Camera and real-time clock (RTC). Click Autotest on the main menu interface. Menu Description Test All To automatically test whether the LCD, audio, camera and RTC are normal.
SpeedFace-V5L Series User Manual System Information With the system information option, you can view the storage status, the version information of the device, and so on. Click System Info on the main menu interface. Menu Name Description Device Displays the current device's user storage, palm, password and face storage, Capacity administrators, access records, attendance and blocklist photos, and user photos.
SpeedFace-V5L Series User Manual Connect to ZKBioAccess MTD Software 14.1 Set the Communication Address Device side Click COMM.> Ethernet in the main menu to set the IP address and Gateway of the device. (Note: The IP address should be able to communicate with the ZKBioAccess MTD server, preferably in the same network segment with the server address) In the main menu, click COMM.
SpeedFace-V5L Series User Manual 14.2 Add Device to the Software You can add a device by searching. The process is as follows: 1) Click Access Control >Device >Search Device, to open the Search interface. Click Search, and it will prompt [Searching……].
SpeedFace-V5L Series User Manual 14.3 Add Personnel on the Software Click Personnel >Person >New. After setting all the parameters, click OK. 14.4 Real-time monitoring on the Software Once ZKBioAccess MTD software installed, users could perform several monitoring operations: Please set the IP address and cloud service server address on the device and add the device to the software.
SpeedFace-V5L Series User Manual Appendix 1 Requirements for Live Collection and Registration of Visible Light Face Images 1) It is recommended to perform registration in an indoor environment with an appropriate light source without underexposure or overexposure. 2) Do not point towards outdoor light sources like door or window or other strong light sources.
SpeedFace-V5L Series User Manual Image1 Face Capture Area Requirements for Visible Light Digital Face Image Data The digital photo should be straight-edged, colored, half-portrayed with only one person, and the person should be uncharted and not in uniform. Persons who wear eyeglasses should remain to put on eyeglasses for photo capturing.
Page 88
SpeedFace-V5L Series User Manual Face The image must have clear contour, real scale, evenly distributed light, and no shadow. Image Format Should be in BMP, JPG or JPEG. Data Requirement Should comply with the following requirements: 1) White background with dark-colored apparel.
Thank you for choosing this hybrid biometric recognition product, which was designed and manufactured by ZKTeco. As a world-renowned provider of core biometric recognition technologies, we are constantly developing and researching new products, and strive to follow the privacy laws of each country in which our products are sold.
SpeedFace-V5L Series User Manual Eco-friendly Operation The product's "eco-friendly operational period" refers to the time period during which this product will not discharge any toxic or hazardous substances when used in accordance with the prerequisites in this manual. The eco-friendly operational period specified for this product does not include batteries or other components that are easily worn down and must be periodically replaced.