Advertisement
Quick Links
Advertisement
Related Manuals for ZKTeco GL300
Summary of Contents for ZKTeco GL300
- Page 1 Installation Guide GL300 Version: 1.0...
- Page 2 Pack list Screws Sticky board Part B Part A...
-
Page 3: Installation
Installation 1. Peel the sticker off the 2. Remove screws from GL300 mounting plate and stick it at Part A the appropriate height indoor... - Page 4 3. Detach the cable 4. Install the outdoor unit and tighten the screws the front panel rear panel cable Pull out the buckle...
- Page 5 5. Secure Part A with the screws 6. When installing Part B, make sure that it is at the same height as Part A insert the cable Note: Please be carefulwhile connecting the cable. Part B Part A...
- Page 6 7. Unfasten and remove screws 8. Install Part B outdoor unit from Part B on the glass door and fix it with the screws Part B...
- Page 7 9. Install indoor unit on the glass 10. Install four batteries and door and secure with the screws fix the cover reset button...
- Page 8 How to change door open direction rotate the mounting bracket reinstall the screws remove the screws and indoor unit 180°...
- Page 9 © Copyright 2018. ZKTeco Inc. ZKTeco Logo is a registered trademark of ZKTeco or a related company. All other product and company names mentioned are used for identification purposes only and may be the trademarks of their respective owners. All specifications are subject to change without notice. All rights reserved.
Need help?
Do you have a question about the GL300 and is the answer not in the manual?
Questions and answers