ZKTeco VT07-B01-W User Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Product Name and Model Number

Thank you for choosing our product. Please read the instructions carefully

before operation. Follow these instructions to ensure that the product is

functioning properly. The images shown in this manual are for illustrative

purposes only.

| 1

P a g e

-W

For further details, please visit our Company's website

www.zkteco.com.

User Manual

Table of Contents

Need help?

Do you have a question about the VT07-B01-W and is the answer not in the manual?

Questions and answers

Summary of Contents for ZKTeco VT07-B01-W

Page 1 Follow these instructions to ensure that the product is functioning properly. The images shown in this manual are for illustrative purposes only. For further details, please visit our Company’s website www.zkteco.com. P a g e Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 2 User Manual relating to the use of the information contained in or referenced by this manual, even if ZKTeco has been advised of the possibility of such damages. This manual and the information contained therein may include technical, other inaccuracies or typographical errors.
Page 3 User Manual About the Company ZKTeco is one of the world’s largest manufacturer of RFID and Biometric (Fingerprint, Facial, Finger-vein) readers. Product offerings include Access Control readers and panels, Near & Far-range Facial Recognition Cameras, Elevator/floor access controllers, Turnstiles, License Plate Recognition (LPR) gate controllers and Consumer products including battery-operated fingerprint and face-reader Door Locks.
Page 4 The general information which helps in performing the operations faster. The information which is significant. Care taken to avoid danger or mistakes. The statement or event that warns of something or that serves as a cautionary example. P a g e Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 5: Table Of Contents
9 SYSTEM SETTINGS ........................... 22 9.1 SOUND SETTINGS ......................................22 9.1.1 DO NOT DISTURB PLAN .........................................23 9.2 DISPLAY SETTINGS ......................................24 9.3 ADVANCED SETTINGS ....................................25 9.3.1 MODIFY PASSWORD ........................................26 9.3.2 DEVICE MANAGEMENT ........................................26 P a g e Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 6 10 MAKE A CALL ............................35 10.1 SET THE COMMUNICATION ADDRESS ..............................35 10.2 ADDING OUTDOOR STATION ...................................36 10.3 MAKE A CALL ON THE DEVICE................................. 36 APPENDIX ..............................39 FCC WARNING ..........................................39 ECO-FRIENDLY OPERATION ....................................40 P a g e Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 8: Installation Set-Up
Step2: Attach the mounting template stickers to the wall and drill holes, then fix the back plate on the wall with the wall mounting screws. Step3: Finally, push the device into the back plate and secure it to the back plate. P a g e Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 9 Step1: Take out the device and the bracket from the box. Step2: Put the white bracket rubber sleeve on the bottom of the bracket. Step3: Finally, insert the bracket into the mounting slot behind the device. P a g e Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 10: Connection Diagram
Connection Diagram Notes: 1. VT07-B01-W , Video intercom device and camera are connected through out the network cable. 2. In LAN, the IP addresses of all devices must be in the same network segment. See figure above for an example.
Page 11: Main Menu
Do Not Disturb mode, the screen is shown below. A red bar When you tap the will appear at the bottom of the screen. Prompts you that the Do Not Disturb feature is turned on. P a g e | 11 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 12 Indicates that the Ethernet connection has been established. Ethernet Indicates that the Ethernet is disconnected. TF Card Indicates that the TF card has been inserted. Wi-Fi signal Indicates that the Wi-Fi is connected normally. P a g e | 12 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 13: Live Video Setting
Tap Live Video on the main menu. Then tap icon on the Outdoor Station Monitor interface. The added IPC will be displayed on the interface. The user can customize the position name. P a g e | 13 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 14: Live Video
When the screen is 1 split screens, all windows are available for snapshotting.  When the screen is 4 split screens, only window 1 is available for snapshotting.  P a g e | 14 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 15: Real-Time Video Of Ipc Monitor
Select an IPC monitor on the IPC Monitor interface to enter the screen. The screen is shown below. Only support real-time monitoring, manual capture, manual recording function, the function of the same outdoo station real-time video. P a g e | 15 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 16: Call Log
Delete the current call log. Turns on/off the sound of the current call log. Play/pause the current call log. Play the last call log. Play the next call log. P a g e | 16 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 17: Missed Call Logs
Select a missed call log in the list to enter the call playback screen. The interface is the same as that of the call log, and will not be repeated here. P a g e | 17 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 18: News Settings
Displays all received and missed call recordings as the same recording as the call log Call Record recording. Manual Record Manually recorded footage during real-time video surveillance. Snap Live video interface manually captures images. Page turning is not supported. P a g e | 18 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 19: Network Settings
The default DNS address is 0.0.0.0. It can be modified according to the network availability. The default Gateway address is 0.0.0.0. It can be modified according to the network Gateway availability. P a g e | 19 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 20: Wireless Network
Once the Wi-Fi is turned on, the device searches for the available WIFI within the network range.  Choose the required Wi-Fi name from the available list and input the correct password in the  password interface, and then select Save to confirm. P a g e | 20 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 22: System Settings
Do Not Disturb Plan Note: The icon on the main interface has higher priority than the Do Not Disturb plan and is limited to this device. P a g e | 22 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 23: Do Not Disturb Plan
2. Each set of times needs to be added manually. When it comes to spanning days, two sets of times need to be set. When multiple sets of times are set, the repeat section records only one set of times. P a g e | 23 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 24: Display Settings
It helps to set the split screen mode, including 1 Split Screen and 4 Split Screen. Screen Mode Language It helps to select the language of the device. Display P a g e | 24 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 25: Advanced Settings
Setting screen to get into its menu options. As shown below. Select an option to be set, enter the password verification interface, enter the current password, and click Sure to enter the setting interface. P a g e | 25 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 26: Modify Password
Note: The password can be set up to 31 characters, and the character types include: letters, numbers, and symbols. 9.3.2 Device Management Tap Device Manage on the Advanced Setting interface. P a g e | 26 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 27 The device will search for all online outdoor stations and IPCs in the LAN. 9.3.2.2 Add Device icon on the Device Manage interface to add the device. P a g e | 27 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 28 The edit function is only used to delete devices. Tap Edit on the Device Manage interface to edit the device. As shown below. Select the device to be deleted and click Delete to delete it. P a g e | 28 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 29: Local Setting
Unlimited. When set to unlimited, the intercom can continue until the call is manually hung up or the outdoor station hangs up. Maximum Video Maximum recording time when recording manually, including: 5min, 10min, Recording Time 15min and 20min. P a g e | 29 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 30: Time Setting
For example, adjust the clock forward one hour at 08: 00 on April 1 and backward one hour at 08: 00 on October 1 (the system turns back to the original time). P a g e | 30 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 31: Storage Manage
Progress bar shows TF card used memory/total memory. Automatic overwriting of Storage Space earlier videos and captures when used memory reaches about 99% (locked videos will not be overwritten). P a g e | 31 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 32: Network Manage
The default DNS address is 0.0.0.0. It can be modified according to the network availability. The default Gateway address is 0.0.0.0. It can be modified according to the network Gateway availability. P a g e | 32 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 33: System Information
Setting interface. View the device's name, model, firmware version, serial number, UID and version date. Reset Settings icon on the Setting interface to get into its menu options. As shown below. P a g e | 33 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 35: Make A Call
On the Main Menu, tap Network to set IP address and Gateway address of the indoor station. Examples are as follows. Outdoor station side On the Main Menu, tap COMM. > Ethernet to set IP address and Gateway address of the outdoor station. P a g e | 35 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 36: Adding Outdoor Station
Once the indoor station is configured with the network, the video intercom function can be realized by tap icon on the video intercom device screen and enter the IP address of the indoor station in the jumping interface. P a g e | 36 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 38 The outdoor station calls the indoor station, the indoor station answers  and clicks the unlock, the indoor station prompts "Door is open", the outdoor station voice prompts "Door is open", the call is not interrupted. P a g e | 38 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 39: Appendix
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator. P a g e | 39 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 40: Eco-Friendly Operation
The components which contain toxins or harmful elements are included due to the current economic or technical limitations which prevent their replacement with non-toxic materials or elements. P a g e | 40 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Page 41 ZKTeco Industrial Park, No. 32, Industrial Road, Tangxia Town, Dongguan, China. Phone : +86 769 - 82109991 : +86 755 - 89602394 www.zkteco.com Copyright © 2022 ZKTECO CO., LTD. All Rights Reserved. P a g e Copyright©2022 ZKTECO CO., LTD. All rights reserved.

ZKTeco VT07-B01-W User Manual

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for ZKTeco VT07-B01-W

Summary of Contents for ZKTeco VT07-B01-W

Table of Contents