Removing The Roll From The Printer; If Roll Paper Jams - Canon imagePROGRAF iPF815 Basic Manual

Removing the Roll from the Printer

Remove rolls from the printer as follows.
• Release the caster lock on the Wheeled Output Stacker and
remove it beforehand.
• If you need to cut a printed roll, select Paper Cutting in the printer
menu and cut the roll at the desired position. (→"Specifying the
Cutting Method for Rolls," User Manual)
• If you have selected Media Menu > ManageRemainRoll > On in
the printer menu, a barcode indicating the amount of paper left is
printed on the leading edge of the roll. However, barcodes are not
printed on some types of paper, and only a text message indicating
paper information is printed.
• If you have activated automatic monitoring of the remaining roll paper, do not remove the roll before the barcode is
printed. You will be unable to keep track of the amount of roll paper left.
Remove the roll from the printer (iPF825: from the Roll 1 (Upper)
position)
1
Press the Load/Eject button.
For the iPF815, go to step 4.
2
Press ▲ or ▼ to select Remove Roll , and then press the
OK button.
3
Press ▲ or ▼ to select Roll 1 (Upper) , and then press
the OK button.
The roll can now be removed.
4
Open the Top Cover and lift the Ejection Guide .
18
OK