KTI Networks KGC-301 Installation Manual page 11

Din-Rail mounting
For a Din-Rail chassis, the device can support mounting on a Din-Rail. An optional Din-Rail bracket,
KC-3DR can be purchased separately. The following figure shows an example after bracket
installation:
Center rack mounting
The media converter can also be installed in KC-1300 center chassis. The center chassis provides the
power supply to the media converter also with optional power redundancy. Up to 16 media converter
devices can be installed in one chassis.
Unscrew and remove the cover of the center connector before inserting the media converter into the
chassis. Secondly, install the slot bracket that is provided in the center chassis package on the media
converter. Then insert the device into one available slot of the center chassis. Refer to the operation
manual of center chassis KC-1300 for more information.
11