KTI Networks KGC-301 Installation Manual page 7

Transmission rate
Duplex support
Network cable
SFP - Dual-speed Fiber Port
Compliance
Connectors
Configuration
Transmission rate
Network cables
Eye safety
LED Indicators
PWR
TP-LINK
TP-1G
FX-LINK
FX-1G
MCU
SW - Configuration DIP Switches
SW1-SW3
SW4
SW5
CENTER - Center Interface
Interface
Connector
Basic Functions
MAC Addresses
Forwarding technology Direct conversion mode when copper port and fiber port are at same line rate
Forwarded packet types Transparent forwarding for all packet types under direct conversion mode
10Mbps, 100Mbps, 1000Mbps
Full/Half duplex
Cat.5 UTP
IEEE 802.3z 1000Base-X, IEEE 802.3u 100BASE-FX
SFP for optional SFP type fiber transceivers
Auto speed detection, Fixed on auto-negotiation 1000Mbps Full duplex
1000Mbps, 100Mbps (Dual-speed support)
MMF 50/125m 62.5/125m, SMF 9/125m
IEC 825 compliant
Power status
UTP Copper port link and activity status
UTP Copper port data rate status
SFP fiber port link and activity status
SFP fiber port data rate status
Diagnostic status
UTP copper port configuration
SFP fiber port configuration
Link Fault Pass Through function setting
For center chassis mounting
FutureBus
Support up to 1K entries under store-and-forward mode
No limitation under direct conversion mode
Store and forward mode when two ports are at different line rates
7