Fine-Tuning The Multipass Suite; Using The Multipass Status Monitor - Canon MultiPASS F20 Software User's Manual

Chapter 6

Fine-tuning the MultiPASS Suite

To successfully operate your MultiPASS system, you need to be familiar
with using the Status Monitor and removing the software.

Using the MultiPASS Status Monitor

You can use the Status Monitor to review the current status of the printer
and any error conditions needing your attention. You cannot interrupt
MultiPASS activity with the Status Monitor.
When the Status Monitor is open, it displays as a window on the
Windows desktop and an icon in the Windows taskbar.
Status Monitor
window
To open the Status Monitor, if currently closed:
On the Windows desktop, click Start, point to Programs or All Programs,
point to MultiPASS Suite, and then click MultiPASS Status Monitor.
To display the Status Monitor menu:
Right-click the Status Monitor window or icon.
To display the Status Monitor window:
If the Status Monitor appears only as an icon on the taskbar, click Restore
on the Status Monitor menu.
To specify the Status Monitor window as the top window:
Click Always On Top on the Status Monitor menu.
To display the port on which the printer is connected:
Click Device Information on the Status Monitor menu.
Chapter 6 Fine-tuning the MultiPASS Suite 113
6
6