Tx (Transmission) Report - Canon MultiPASS F50 Fax Manual

TX (Transmission) REPORT

The machine is factory-set to print a TX (transmission) REPORT only when an error occurs during sending. To
change this setting, → TX REPORT, p. 9-4.
If you set the machine to print a report, a TX REPORT or an ERROR TX REPORT, similar to the ones below,
will be printed depending on the setting you select.
12/03/2001 17:47 FAX 123 4567
TRANSMISSION OK
TX/RX NO
CONNECTION TEL
CONNECTION ID
ST. TIME
USAGE T
12/03/2001 17:21 FAX 123 4567
PGS. SENT
RESULT
OK: TRANSMISSION SUCCESSFUL
NG: SOME OR NO PAGES SENT
NUMBER OF PAGES SENT
TRANSMISSION DURATION
TRANSMISSION TIME
CANON
***********************
*** TX REPORT ***
***********************
0003 :COLOR TX
1 432 2060
Canon OPTICS
12/27 14:59
00'00
CANON
0
NG #018
BUSY/NO SIGNAL
*******************************
ERROR TX REPORT
***
*******************************
TX FUNCTION WAS NOT COMPLETED
TX/RX NO
CONNECTION TEL
CONNECTION ID
ST. TIME
USAGE T
PGS. SENT
RESULT
THE SLEREXE COMPANY LIMITED
SAPORS LANE•BOOLE•DORSET•BH25 8ER
TELEPHONE BOOLE (945 13) 51617 – FAX 1234567
Our Ref. 350/PJC/EAC
Dr. P. N. Cundall,
Mining Surveys Ltd.,
Holroyd Road,
Reading,
Berks.
IF YOU ENABLE THE PRINT WITH IMAGE SETTING
(→ p. 9-4), THE FIRST PAGE OF THE DOCUMENT
WILL PRINT ON THE REPORT TO REMIND YOU OF
THE CONTENTS OF THE DOCUMENT (FOR BLACK &
WHITE DOCUMENTS ONLY).
001
***
0004
20 545 8545
Canon EUROPE
12/03 17:21
00'18
1
NG
December
":COLOR TX" INDICATES A
COLOR TRANSMISSION.
7
001
3, 2001
7-3