Group Dialing; Creating Groups - Canon MultiPASS F50 Fax Manual

Group Dialing

Creating Groups

1
Press Menu.
Use F or E to select TEL
2
REGISTRATION.
M E N U
4 . T E L R E G I S T R A T I O N
Ex:
3
Press Set.
T E L R E G I S T R A T I O N
1 . 1 - T O U C H S P D D I A L
4 Use F or E to select GROUP DIAL.
T E L R E G I S T R A T I O N
3 . G R O U P D I A L
5
Press Set.
G R O U P D I A L
0 1 = 1 - T O U C H S P D D I A L
Ex:
6
Select a one-touch speed dialing button or
coded speed dialing code under which you
want to register the group.
• If you wish to register a group under a
button or code already registered for speed
NOTE
dialing, or you want to re-enter a group,
you must delete the previous information
first. (→ pp. 3-3, 3-5)
To register a group under a one-touch
speed dialing button:
Use F or E to select the button under
which you want to register the group (01 to
12).
G R O U P D I A L
0 3 =
Ex:
• If a one-touch speed dialing button has already
been registered, 1-TOUCH SPD DIAL or
GROUP DIAL appears.
To register a group under a coded
speed dialing code:
Press Coded Dial, then use the numeric
buttons to enter the code under which you
want to register the group (00 to 99).
G R O U P D I A L
A 2 1 =
Ex:
• If a coded speed dialing code has already been
registered, CODED SPEED DIAL or GROUP
DIAL appears.
7
Press Set twice.
G R O U P D I A L
1 . T E L E P H O N E N U M B E R
T E L =
8
Enter the one-touch and/or coded speed
dialing numbers you want to register in the
group.
• You cannot register numbers in groups that have
not been registered for speed dialing.
• You can review the numbers registered under the
group by pressing F or E.
- If you want to delete one of these numbers from
the group, press and hold F (ERASING END is
displayed), then press Set.
- If you want to delete all numbers in the group,
press and hold F repeatedly until all numbers
are deleted, then press Set. Deleting all numbers
will cancel the group. (The registered names are
automatically cleared when you cancel a group.)
- If you want to add a number to the group, press
the one-touch speed dialing button or the coded
speed dialing code to which the number is
assigned, then press Set.
• You can cancel registering numbers and return to
standby mode by pressing the Stop/Reset
anytime before pressing Set in step 9.
3
3-7