Canon MultiPASS F50 Fax Manual page 67

6. COLOR DIRECT TX
4. RX SETTINGS
1. ECM RX
2. FAX/TEL AUTO SW
1. RING START TIME
2. F/T RING TIME
3. DEFAULT ACTION
3. DRPD:SELECT FAX
4. INCOMING RING
RING COUNT
* Even if you have set INCOMING RING to ON, ringing will only occur if you have connected a telephone to
your machine.
9-6
Name
Enables/disables sending of color documents
from the ADF to fax machines that do not have
color faxes capability. (→ p. 4-1)
OFF:
Color documents cannot be sent to fax machines
that do not support color faxes.
ON:
Color documents can be sent to fax machines
that do not support color faxes. (The document
is converted to black & white.)
Enables/disables Error Correction Mode (ECM)
during reception.
When the machine is set to FAX/TEL AUTO
SW, you can set its details. (→ p. 5-2)
Selects the time the machine takes to check
whether a call is from a fax machine or a
telephone.
Selects the length of time the machine rings
when the call is a voice call.
Sets whether the machine switches to receive
mode after the ring time set in F/T RING
TIME has elapsed.
When the machine is set to DRPD, selects a ring
pattern when the machine receives faxes. (→ p.
5-4)
When the machine is set to FAX ONLY MODE,
FAX/TEL AUTO SW or DRPD, enables/
disables ringing when the machine receives a
call.*
Selects the number of incoming rings before the
machine begins receiving.
Description Settings
OFF
ON
ON
OFF
-
8 SEC
(0 to 30)
15 SEC
(10 to 45)
RECEIVE
DISCONNECT
DOUBLE RING
SHORT-SHORT-
LONG
SHORT-LONG-
SHORT
OTHER RING
TYPE
NORMAL RING
OFF
ON
2 TIMES
(1 to 99)