Changing/Deleting A Coded Speed Dialing Entry - Canon MultiPASS F50 Fax Manual

12
To continue registering other coded speed
dialing codes, repeat the procedure from
step 6.
-or-
Press Stop/Reset to return to standby
mode.

Changing/Deleting a Coded Speed Dialing Entry

1
Follow steps 1 to 5 of "Registering
Numbers for Coded Speed Dialing". ( → p.
3-4)
Use F or E to select the coded speed
2
dialing code assigned to the entry you want
to change or delete.
C O D E D S P E E D D I A L
A 3 2 = 8 1 7 7 3 3 1 1 5
Ex:
3
Press Set twice.
C O D E D S P E E D D I A L
1 . T E L E P H O N E N U M B E R
T E L E P H O N E N U M B E R
T E L = 8 1 7 7 3 3 1 1 5 _
Ex:
To Change a Coded Speed Dialing
Entry:
Use F to delete the previous entry, then re-
4
enter the fax/telephone number.
T E L E P H O N E N U M B E R
T E L = 8 1 7 7 3 3 1 7 3 _
Ex:
• If you do not want to change the fax/telephone
number, ignore this step.
• Use E to enter a space and move the cursor to the
next digit. Spaces are optional and are ignored
during dialing.
• Press Redial/Pause to enter a pause.
• If you make a mistake, press F to delete the last
number or press and hold F to delete all numbers
you entered.
• You can print the CODED SPEED DIAL
LIST showing all the numbers and names
NOTE
registered for coded speed dialing (→ p. 3-
9). Keep this list near your machine for
easy reference when dialing.
5
Press Set twice.
T E L E P H O N E N U M B E R
D A T A E N T R Y O K
C O D E D S P E E D D I A L
2 . N A M E
N A M E
C a n o n U C
Ex:
6 Press and hold F to delete the previous
entry, then re-enter the name.
N A M E
C a n o n U K
Ex:
• If you do not want to change the name, ignore this
step.
• If you are unsure how to enter characters, → p. 2-
2.
7
Press Set.
N A M E
D A T A E N T R Y O K
C O D E D S P E E D D I A L
A 3 3 =
Ex:
8
Press Stop/Reset to return to standby
mode.
: A
3
: A
: A
3-5