Paper Feeding Problems - Canon MultiPASS C635 User Manual

Problem
Colors are missing
Hue changes

Paper Feeding Problems

Problem
Paper does not load
Paper is loaded skewed
(printing is skewed)
Multiple sheets load
into unit at the same
time
Chapter 8
Cause
The print head may need to
be cleaned.
The print nozzles may be
clogged with dust.
A BJ tank may be empty.
Cause
The sheet feeder may contain
too many sheets.
Paper may not be inserted
correctly.
Paper may not be stacked
correctly in the sheet feeder.
Paper may not be stacked
correctly.
Sheets of paper may be
sticking together.
Too much paper may be
stacked in the sheet feeder.
Solution
Clean the print head (see
page 7-8).
Clean the print head (see
page 7-8).
Replace empty BJ tanks as
needed (see page 7-16).
Solution
Make sure the stack of paper
in the sheet feeder does not
exceed the limit mark.
Make sure the stack of paper
is inserted into the sheet feeder,
and the paper guide is adjusted
correctly.
Make sure the stack of paper
is straight in the sheet feeder.
Make sure the right side of the
stack of paper is aligned against
the right side of the sheet
feeder and the paper guide is
aligned against the left side.
Make sure the paper exit path
is clear.
Make sure paper is installed
correctly in the sheet feeder.
Be sure to fan the stack of
paper before placing it in the
sheet feeder.
Make sure the paper rest is
extended and the paper is
stacked correctly in the sheet
feeder.
Troubleshooting 8-21